ICS-Advisories

Risk Evaluation

An update is available that resolves a vulnerability in the product versions listed as affected in the advisory. An attacker who successfully exploits this vulnerability could gain access to the OPC UA server component on affected devices due to insufficient entropy of authenticators used by mapp Audit.

Zusammenfassung der Gegenmaßnahmen

The problem is corrected in the following product versions: mapp Services >= 6.8.0 B&R recommends that customers apply the update at earliest convenience when the vulnerable functionality mapp Audit is used. The process to install updates is described in the user manual. The step to identify the installed product version is described in the user manual.

Risk Evaluation

Successful exploitation of these vulnerabilities could result in an attacker accessing sensitive credentials, disrupting connected infrastructure, or manipulating physical equipment, which could present a physical safety risk.

Zusammenfassung der Gegenmaßnahmen

Tycon Systems has released firmware 2.4.5, which resolves this vulnerability by requiring an administrator username and password to be set before the web interface is served. Further inquiries can be directed to security@tyconsystems.com.

Risk Evaluation

Successful exploitation of this vulnerability could allow for an attacker to cause a denial-of-service condition on the product.

Zusammenfassung der Gegenmaßnahmen

Rockwell Automation recommends users are to migrate to 5034-OB8.

Risk Evaluation

An information disclosure vulnerability in the web GUI of Murrelektronik Xelity switches causes MAC addresses from the device's MAC address table to be written into a server-side log that is exposed via the device's web interface to unauthenticated users. The leak is triggered when an authenticated administrator invokes the 'Copy learned MAC Addresses' function, which causes a syslog error that inserts the affected MAC addresses into the log output. Once the error has been triggered, any unauthenticated attacker with network access to the web interface can retrieve the leaked MAC addresses via common browser developer tools. The vulnerable functionality was introduced in version 2.1.0 and is fixed in version 2.1.1.

Zusammenfassung der Gegenmaßnahmen

Update the affected Xelity switches to firmware version V2.1.1 or later. This firmware version removes the syslog error that caused the MAC address table contents to be written to a web-accessible log.

Risk Evaluation

Weidmueller security routers IE-SR-2TX-WL and IE-SR-2TX-WL-4G are affected by an unauthenticated remote code execution vulnerability. IE-SR-2TX-WL-4G routers are also affected by a SMS password authorization bypass vulnerability. Weidmueller has released new firmware versions of the affected products to fix the vulnerabilities.

Zusammenfassung der Gegenmaßnahmen

Restrict access to the web management interface using firewall rules, access control lists (ACLs), a VPN, or a trusted management network, and ensure the interface is not directly exposed to the public internet, until the firmware update is installed.

Risk Evaluation

Schneider Electric is aware of a vulnerability in the following products: The Easergy C5 is a scalable and interoperable bay controller, protection and merging unit for large and critical infrastructure electrical distribution systems. The Easergy MiCOM P30 is a family of multifunction protection and control relays designed for medium, high and extra high voltage electrical networks. The Easergy MiCOM P40 is a protection relay series for Medium Voltage, High Voltage and Extra High Voltage protection. The Easergy MiCOM C264 is a modular and compact substation or bay controller, smart RTU and MV one box solution The EcoStruxure™ Power Automation System Gateway (EPAS=GTW) is a scalable, interoperable, and rugged communication gateway that helps to remotely monitor and operate electrical processes The EcoStruxure Power Automation System User Interface (EPAS-UI) product is an HMI SCADA designed for electrical networks and substations operations. The EcoStruxure Power Automation System Intelligent Power Management System and Fast Load Shedding (iPMFLS) is a range of solutions designed to overcome size and performances constraints. The EcoStruxure™ Power Operation (EPO) are an on-premises software offers that provides a single platform to monitor and control medium and lower power systems. The PowerLogic™ P5 is a medium voltage protection relay. The PowerLogic™ P7 is a protection and control platform designed for complex and advanced electrical network applications. The PowerLogic™ T300 is a modular platform for medium voltage and low voltage public distribution network management. The PowerLogicTM T500 is a control unit and RTU for substation automation. The Saitel DP RTU is a modular platform for medium voltage and low voltage public distribution and transmission network management. The EasyLogic T150 (formerly Saitel DR RTU) is a field device, offering a solid and powerful platform for data acquisition, communication, automation and IED integration for distribution and transmission networks, generation sector and railway. Failure to apply the fix provided below may risk session hijacking, which could result in malicious actors performing unauthorized operations within the affected system.

Zusammenfassung der Gegenmaßnahmen

Version D7.34 of MiCOM C264 includes a fix for this vulnerability. Contact Schneider Electric’s Customer Care Center for information on how to contact your local Application Center to update the device. Reboot is required

Risk Evaluation

Multiple internal virtual filesystem paths are unintentionally accessible remotely in the SICK ICR890-4 and SICK InspectorP6xx devices. If exploited, this vulnerability could potentially allow an unauthenticated attacker to compromise the availability, integrity, and confidentiality of the devices.

Zusammenfassung der Gegenmaßnahmen

Users are recommended to upgrade to version 5.4.0.

Risk Evaluation

Successful exploitation of this vulnerability could allow a local attacker with low privileges to extract user credentials (passwords and authentication tokens) from system memory, potentially leading to unauthorized access to the application and connected systems.

Zusammenfassung der Gegenmaßnahmen

Johnson Controls has released a patched version (v2.01.01) to address this vulnerability. To help reduce the risk of exploitation, Johnson Controls suggests considering the following defensive measures: Upgrade the Simplex Incident Manager to version v1.01.05 or later. Restrict local access to systems running the Simplex Incident Manager to authorized personnel only. Implement endpoint protection and monitoring to detect memory-dumping tools or suspicious processes. Enforce strong access control policies and the principle of least privilege on host systems. Utilize full-disk encryption and secure boot to reduce the risk of offline memory analysis. Monitor for unauthorized local access attempts and implement audit logging.

Risk Evaluation

Simcenter Nastran is affected by a stack overflow vulnerability that could be triggered when an application binary reads arbitrary string as a file argument. If a user is tricked to run one of the impacted application binary with a malicious string, an attacker could leverage the vulnerability to perform remote code execution in the context of the current process. Siemens has released new versions for the affected products and recommends to update to the latest versions.

Zusammenfassung der Gegenmaßnahmen

Update to V2606 or later version

Risk Evaluation

Successful exploitation of this vulnerability could allow a low-privilege user or attacker to inject a persistent malicious payload via a crafted URL that executes in the context of other users' sessions, including administrators, potentially leading to session hijacking and unauthorized access.

Zusammenfassung der Gegenmaßnahmen

Johnson Controls recommends the following actions:

Risk Evaluation

Siemens LOGO! Soft Comfort contains multiple vulnerabilities in its project-file encryption and password handling mechanisms. A local attacker could exploit these vulnerabilities to extract the master key, allowing them to decrypt project data or remove project passwords. The lack of password salting enables offline dictionary or brute-force attacks against the password hashes. Successful exploitation could result in unauthorized access to, or modification of, sensitive project logic and configurations. Siemens has released a new version for LOGO! Soft Comfort and recommends to update to the latest version.

Zusammenfassung der Gegenmaßnahmen

Update to V9 or later version Note: A hardware upgrade to LOGO! V9 BM or later is also required to avoid compatibility mode, in which the vulnerabilities addressed by this advisory remain present.

Risk Evaluation

Solid Edge is affected by multiple file parsing vulnerabilities that could be triggered when the application reads specially crafted files in PAR, PSM or DFT format. This could allow an attacker to crash the application or execute arbitrary code. Siemens has released new versions for the affected products and recommends to update to the latest versions.

Zusammenfassung der Gegenmaßnahmen

Update to V225.0 Update 15 or later version

Risk Evaluation

Simcenter Femap contains two file parsing vulnerabilities that could be triggered when the application reads files in BMP file format. If a user is tricked to open a malicious file with the affected application, this could lead the application to crash or potentially lead to arbitrary code execution. Siemens has released a new version for Simcenter Femap and recommends to update to the latest version.

Zusammenfassung der Gegenmaßnahmen

Update to V2606.0001 or later version

Risk Evaluation

Parasolid is affected by an out of bounds read vulnerability that could be triggered when the application reads files in X_T format. This could allow an attacker to crash the application or execute arbitrary code. Siemens has released new versions for the affected products and recommends to update to the latest versions.

Zusammenfassung der Gegenmaßnahmen

Update to V38.0.235 or later version

Risk Evaluation

Siveillance Video Management Servers contains a vulnerability that could allow a Remote Code Execution attack. Siemens has released new versions for the affected products and recommends to update to the latest versions.

Zusammenfassung der Gegenmaßnahmen

Update to V23.3 HotfixRev27 or later version

Risk Evaluation

A vulnerability in Desigo DXR and PXC controllers has been identified that could allow an attacker to cause denial of service conditions by sending malformed BACnet packets. Recovery requires a device reset or reboot to restore normal functionality. Siemens has released new versions for the affected products and recommends to update to the latest versions.

Zusammenfassung der Gegenmaßnahmen

Update to V01.21.233.16-7862 or later version Please contact your local Siemens office for additional support in obtaining the update.

Risk Evaluation

Successful exploitation of these vulnerabilities could allow an attacker to read data from the device or gain access to affected workstations.

Zusammenfassung der Gegenmaßnahmen

ANDRITZ has addressed these issues in version V8.00.00 (released 2024-12) and in version V8.15.00 (released 2026-07) and encourages users to keep their systems updated to the latest version (currently HIPASE-250 Version V8.15.00). For more information, users can contact ANDRITZ at the following website: https://www.andritz.com/group-en/contact

Risk Evaluation

Hitachi Energy is aware of Dirty Frag vulnerabilities that affect APM Edge product versions listed in this document. Successful exploitation of these vulnerabilities could result in impact on confidentiality, integrity and availability of the product. Please refer to the Recommended Immediate Actions for information about the mitigation/remediation.

Zusammenfassung der Gegenmaßnahmen

Disable the esp4 and esp6 modules [2]

Risk Evaluation

Successful exploitation of these vulnerabilities could allow an attacker to decrypt sensitive data, bypass authentication controls, gaining unauthorized access to read arbitrary files on the system, or gain unauthorized access to protected system resources.

Zusammenfassung der Gegenmaßnahmen

To help reduce risk of exploitation, Johnson Controls recommends the following defensive measures: Apply v4.1.0 or later patches for all Airwalls.

Risk Evaluation

Successful exploitation of this vulnerability may allow an attacker to inject and execute arbitrary OS commands with root privileges.

Zusammenfassung der Gegenmaßnahmen

Haiwell has addressed the issue in patch version number Scada-v3.50.1.19, which is available for download on their website: https://en.haiwell.com/app/system/entrance.php?m=include&c=access&a=dodown&lang=en&id=361

Risk Evaluation

Successful exploitation of this vulnerability could allow an attacker to tamper with serialized data, potentially resulting in code execution during deserialization.

Zusammenfassung der Gegenmaßnahmen

AVEVA recommends that customers using affected product versions should perform the following to mitigate the risk of exploit: 1. Evaluate the impact of these vulnerabilities based on your operational environment, architecture, and product implementation. 2. Plan an upgrade of Servers and Clients to one of the available fixed versions listed in this document. 3. Configure Servers and Clients as described in this document.

Risk Evaluation

This advisory addresses multiple security vulnerabilities in PLCnext firmware versions prior to 2026.0.3. The vulnerabilities may allow unauthenticated attackers to cause denial of service, trigger unexpected system behavior, or execute unauthorized SQL queries. Successful exploitation could impact the availability, integrity, and confidentiality of affected PLCnext Control devices. All issues are resolved in PLCnext firmware version 2026.0.3.

Zusammenfassung der Gegenmaßnahmen

Update to PLCnext firmware version 2026.0.3 or later which fixes this vulnerability. Check regularly for firmware updates and apply them as soon as they are available for the specific device.

Risk Evaluation

Siemens License Server is affected by multiple vulnerabilities which could allow an attacker to elevate its privileges and read arbitrary files on the system. Siemens has released a new version for Siemens License Server (SLS) and recommends to update to the latest version.

Zusammenfassung der Gegenmaßnahmen

Update to V5.1 or later version

Risk Evaluation

Fortinet has published information on vulnerabilities in FortiOS. This advisory lists the related Siemens Industrial products. Siemens recommends to contact customer support for additional information, and follow Fortinet advisory for workarounds and mitigation measures.

Zusammenfassung der Gegenmaßnahmen

Contact customer support to receive detailed information

Risk Evaluation

Schneider Electric is aware of a vulnerability in its Modicon M340 https://www.se.com/ww/en/product-range/1468-modicon-m340-pac/, BMXNOR0200H https://www.se.com/us/en/product/BMXNOR0200H/communication-module-modicon-m340-iec-608705101-104-dnp3-for-severe-environments/: Modicon M340 X80 Ethernet Communication Modules, BMXNGD0100 https://www.se.com/us/en/product/BMXNGD0100/communication-module-modicon-m580-global-data-service/: M580 Global Data module, BMXNOC0401 https://www.se.com/us/en/product/BMXNOC0401/network-module-modicon-m340-ethernet-ip-and-modbus-tcp-4-x-rj45/?pageType=product&sourceId=BMXNOC0401: Modicon M340 X80 Ethernet Communication modules, BMXNOE0100 https://www.se.com/ww/en/product/BMXNOE0100/network-module-modicon-m340-modbus-tcp-1-x-rj45-flash-memory-card/?pageType=product&sourceId=BMXNOE0100: Modbus/TCP Ethernet Modicon M340 module, BMXNOE0110 https://www.se.com/ww/en/product/BMXNOE0110/ethernet-tcp-ip-network-module-modicon-m340-automation-platform-flash-memory-card-internal-ram-16-mb-1-x-rj45-10-100/: Modbus/TCP Ethernet Modicon M340 FactoryCast module product(s). Failure to apply the fix provided below may risk Denial Of Service attack, which could result in the unavailability of the devices.

Zusammenfassung der Gegenmaßnahmen

Version 3.60 of BMXNOE0100 includes a fix for this vulnerability and is available for download here: https://www.se.com/ww/en/product/BMXNOE0100/networkmodule-modicon-m340-modbus-tcp-1-x-rj45-flash-memorycard/ Reboot is needed to complete the firmware upgrade