ICS-Advisories

Risk Evaluation

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.1. Siemens has released a new version for SIMATIC S7-1500 TM MFP - GNU/Linux subsystem and recommends to update to the latest version. Siemens is preparing further fixes and recommends specific mitigations for products where fixes are not or not yet available. SIMATIC S7-1500 TM MFP V1.1 is no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V1.1 only; for version V1.1.1 refer to SSA-784472.

Zusammenfassung der Gegenmaßnahmen

Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

Risk Evaluation

LOGO! 8 BM (incl. SIPLUS variants) contains multiple vulnerabilities. These could allow an attacker to execute code remotely, put the device into a denial of service state, or change the behavior of the device. Siemens has released new versions for the affected products and recommends to update to the latest versions.

Zusammenfassung der Gegenmaßnahmen

Protect the LSC access to the device with a strong password.

Risk Evaluation

The installers used to install several Siemens products are affected by a DLL hijacking vulnerability. This could allow an attacker to execute arbitrary code when a legitimate user installs an application that uses the affected installer component. This vulnerability poses a risk only during setup and installation phase of the affected applications downloaded e.g. via OSD (Online Software Delivery). Siemens has released new versions for several affected products and recommends using the latest versions during setup and installation. Siemens is preparing further fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.

Zusammenfassung der Gegenmaßnahmen

Harden the application host to prevent local access by untrusted personnel

Risk Evaluation

The products listed below contain multiple vulnerabilities that could allow an attacker to cause a denial of service and potentially impact the availability of the affected device. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens recommends specific mitigations for products where fixes are not or not yet available.

Zusammenfassung der Gegenmaßnahmen

 CVE-2026-89208 - Apply network segmentation and put the controllers behind properly configured gateways/firewalls.

Risk Evaluation

Users of Industrial Edge Devices are advised to consult the respective Security Advisories for their devices (for Siemens Industrial Edge devices see Additional Information). Industrial Edge Device Kit contains multiple path traversal vulnerabilities that could facilitate an authenticated remote attacker to access sensitive internal information. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens recommends specific countermeasures for products where fixes are not, or not yet available.

Zusammenfassung der Gegenmaßnahmen

Ensure network access to affected products is limited to trusted parties only

Risk Evaluation

.NET Client Library for SIMATIC S7 Webserver API contains multiple vulnerabilities that could allow an attacker to obtain sensitive information or write arbitrary files outside the intended download directory. Siemens has released a new version for .NET Client Library for SIMATIC S7 Webserver API and recommends to update to the latest version.

Zusammenfassung der Gegenmaßnahmen

Update to V3.3.61 or later version

Risk Evaluation

Affected products contain a local arbitrary code execution vulnerability that could allow an attacker to perform actions against the operation system of that environment. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends countermeasures for products where fixes are not, or not yet available. Siemens has released products based on the Totally Integrated Automation Portal (TIA Portal) V20 which are not affected by CVE-2024-52051. See the chapter "Additional Information" below for more details.

Zusammenfassung der Gegenmaßnahmen

Currently no fix is planned

Risk Evaluation

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version >= V3.1.0 and < V3.1.5 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens has released new versions for the affected products and recommends to update to the latest versions. SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP >= V3.1.0 and < V3.1.5 are no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. Note: This SSA advises vulnerabilities for firmware version V3.1 only; for versions < V3.1 refer to Siemens Security Bulletin SSB-439005 (https://cert-portal.siemens.com/productcert/html/ssb-439005.html).

Zusammenfassung der Gegenmaßnahmen

Update to V3.1.5 or later version

Risk Evaluation

OpenSSL has published a stack based buffer overflow vulnerability that allows a remote attacker to cause a denial of service (DoS) or potentially allow for remote code execution. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.

Zusammenfassung der Gegenmaßnahmen

As a defense-in-depth measure, organizations may review whether affected systems are exposed to untrusted CMS/PKCS#7 content from external sources.

Risk Evaluation

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1.7 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). Siemens is preparing fixes and recommends specific mitigations for products where fixes are not or not yet available.

Zusammenfassung der Gegenmaßnahmen

Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

Risk Evaluation

Affected products do not properly sanitize user-controllable input when parsing project files. This could allow an attacker to cause a type confusion and execute arbitrary code within the affected application. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.

Zusammenfassung der Gegenmaßnahmen

Only open projects from trusted sources.

Risk Evaluation

RUGGEDCOM CROSSBOW contains multiple vulnerabilities that could allow an attacker to execute arbitrary SQL commands on the underlying database, retrieve sensitive administrative credentials, escalate privileges, and perform unauthorized operations such as modifying system configurations or causing a denial of service. Siemens has released a new version for RUGGEDCOM CROSSBOW and recommends to update to the latest version.

Zusammenfassung der Gegenmaßnahmen

Update to V6.0 or later version

Risk Evaluation

KACO blueplanet Inverters contain multiple vulnerabilities that could allow an attacker to derive the credentials from the devices serial number and misuse them to gain unauthorized access. KACO new energy GmbH has released new versions for several affected products and recommends to update to the latest versions. KACO new energy GmbH is preparing further fix versions and recommends countermeasures for products where fixes are not, or not yet available.

Zusammenfassung der Gegenmaßnahmen

Currently no fix is planned

Risk Evaluation

Multiple SIMATIC WinCC versions are affected by a database privilege escalation vulnerability that could allow an authenticated user with access to the database to execute commands on the underlying host system. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fixes and recommends mitigations for products where fixes are not or not yet available.

Zusammenfassung der Gegenmaßnahmen

Currently no fix is available

Risk Evaluation

Several tools for the SIMOTION system are affected by a local privilege escalation vulnerability. This could allow an attacker to execute arbitrary code with SYSTEM privileges when a legitimate user installs an application that uses the affected setup component. This vulnerability poses a risk only during setup and installation phase of the affected tools. Siemens has released a new version for SIMATIC Technology Package TPCamGen and recommends to update to the latest version. Siemens recommends specific mitigations for products where fixes are not or not yet available.

Zusammenfassung der Gegenmaßnahmen

Ensure that no other users are logged in and that no unknown programs are running before starting the installation of the affected products

Risk Evaluation

SIMATIC S7-1500 devices contain multiple vulnerabilities in the web server that could allow an attacker to execute malicious code in an authorized user’s browser session and perform PLC operations within the scope of that user’s authorization. Siemens is preparing fixes and recommends specific mitigations for products where fixes are not or not yet available.

Zusammenfassung der Gegenmaßnahmen

Disable the webserver if not required on the affected systems. Restrict the access to Port 80/tcp and 443/tcp to trusted IP address only

Risk Evaluation

The products listed below contain a vulnerability that could allow an attacker to perform an out-of-bound read, potentially leading to information disclosure or denial of service of the TPM. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends countermeasures for products where fixes are not, or not yet available.

Zusammenfassung der Gegenmaßnahmen

Currently no fix is planned

Risk Evaluation

Affected products do not properly restrict access permissions to a local Windows Named Pipe and do not properly sanitize user-controllable input sent to that Named Pipe. This could allow a local authenticated attacker to cause a type confusion and execute arbitrary code within the affected application and its privileges. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.

Zusammenfassung der Gegenmaßnahmen

On Desktop systems: Execute affected software on Windows hosts where only a single user is configured

Risk Evaluation

RUGGEDCOM CROSSBOW Station Access Controller (SAC) contains multiple vulnerabilities in the integrated SQLite component that could allow an attacker to execute arbitrary code, cause a denial of service, or obtain sensitive information. Siemens has released a new version for RUGGEDCOM CROSSBOW Station Access Controller (SAC) and recommends to update to the latest version.

Zusammenfassung der Gegenmaßnahmen

Update to V6.0 or later version

Risk Evaluation

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.1.1. Siemens is preparing fixes and recommends specific mitigations for products where fixes are not or not yet available.

Zusammenfassung der Gegenmaßnahmen

Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

Risk Evaluation

This advisory documents the impact of CVE-2024-3596 (also dubbed "Blastradius"), a vulnerability in the RADIUS protocol, to SIPROTEC, SICAM and related products. The vulnerability could allow on-path attackers, located between a Network Access Server (the RADIUS client, e.g., a SICAM device) and a RADIUS server, to forge Access-Request packets in a way that enables them to modify the corresponding server response packet at will, e.g., turning an "Access-Reject" message into an "Access-Accept". This would cause the Network Access Server to grant the attackers access to the network with the attackers desired authorization (and without the need of knowing or guessing legitimate access credentials). Further details incl. external references can be found in the chapter "Additional Information". Siemens has released new versions for several affected products and recommends to update to the latest versions, and to configure the updated systems as recommended in the chapter "Additional Information". Siemens has released new versions for the affected products and recommends to update to the latest versions.See chapter "Additional Information" for details.

Zusammenfassung der Gegenmaßnahmen

Configure the RADIUS server to require the presence of a Message-Authenticator attribute in all Access-Request packets from RADIUS client devices that support it

Risk Evaluation

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.0. Siemens has released a new version for SIMATIC S7-1500 TM MFP - GNU/Linux subsystem and recommends to update to the latest version. SIMATIC S7-1500 TM MFP V1.0 is no longer maintained and there won't be any update to the CVE list anymore. Please update to the latest version. This advisory lists vulnerabilities for firmware version V1.0 only; for V1.1 refer to Siemens Security Advisory SSA-265688 (https://cert-portal.siemens.com/productcert/html/ssa-265688.html).

Zusammenfassung der Gegenmaßnahmen

Only build and run applications from trusted sources

Risk Evaluation

The aas-edge-client is a reference implementation of an Asset Administration Shell (AAS) edge application, published by Murrelektronik GmbH on GitHub for the LNI 4.0 testbed demonstrator. Its REST API is bound to all network interfaces on TCP port 18000, requires no authentication and accepts cross-origin requests from any origin. The reference implementation was never intended for productive use and is no longer maintained. Affected are all aas-edge-client versions.

Zusammenfassung der Gegenmaßnahmen

Discontinue the use of the aas-edge-client and remove any existing deployments as well as copies of the source code and container image. The code must not be used in any environment.

Risk Evaluation

Multiple WAGO devices are affected by a vulnerability in the dynamic creation of BACnet File Objects. The object name is used as a file path without sufficient validation and is not restricted to the intended directory, so relative paths can be used to reach files elsewhere in the file system.

Zusammenfassung der Gegenmaßnahmen

Update to Firmware version 4.8.9 (FW30) or higher. For the latest custom Firmware please contact the WAGO support.

Risk Evaluation

Several vulnerabilities in the Wibu Systems CodeMeter Runtime affect the SICK products Sentio Creator, Sentio Compose, Safety Designer, Stream Editor, CODE-LOC, LiDAR-LOC, PLB, SIM1200-2A1A130 LiDAR-LOC and multiple SICK Industrial PCs (APU0G00, APU0G50, APU0G03, APU3F00, APU4600, APU8G00 and APU8G20), which ship with CodeMeter Runtime as part of their preinstalled image. For Sentio Compose, Safety Designer, Stream Editor and PLB, only CVE-2026-81572 is relevant. Vulnerabilities requiring the CodeMeter Runtime to be configured as a server are not applicable to default Sentio Compose, Safety Designer, Stream Editor and PLB installations, as the runtime is shipped with the Network Server and CmWAN Server functionalities disabled. Customers who have modified the default configuration and enabled CodeMeter server functionality should review the remaining vulnerabilities for potential impact. The vulnerabilities could potentially affect the integrity, confidentiality, and availability of the affected products.

Zusammenfassung der Gegenmaßnahmen

Customers are strongy recommended to update the Codemeter Runtime to the latest version (>= 9.10). The software can be downloaded directly on the Wibu Systems website: https://www.wibu.com/de/support/anwendersoftware/anwendersoftware.html