Skip to content
IACS RadarIndustrial Cyber Exposure & Intelligence

CISA + vendors

ICS Advisories

Advisories specifically aimed at industrial control systems — from CISA ICS-CERT and directly from vendors (including Siemens, ABB, Schneider Electric, WAGO and Phoenix Contact) — including revision history (initial publication, Update A, Update B) and linked CVEs.

499

Found

Advisory data: live connection— last retrieved: 20 November 2026 at 19:46.

Filters

499 advisories found

SSA-127084

SSA-127084: Multiple Vulnerabilities in Fortigate NGFW before V7.6.7 on RUGGEDCOM APE1808 Devices

Siemens — RUGGEDCOM APE1808

Siemens ProductCERThigh

Published

11 August 2026

Last update

10 November 2026

Affected sectors

Risk evaluation

Fortinet has published information on vulnerabilities in FortiOS. This advisory lists the related Siemens Industrial products. Siemens recommends to contact customer support for additional information, and follow Fortinet advisory for workarounds and mitigation measures.

Mitigation summary

Update Fortigate NGFW to V7.6.7 or later following the secure update recommendation procedure. Contact customer support to receive detailed information

Revision history (3)
  1. Initial publication — 11 August 2026

    Publication Date

  2. Update A — 13 October 2026

    Added CVE-2026-71408, CVE-2026-71407 and CVE-2026-84393

  3. Update B — 10 November 2026

    Added CVE-2026-106174

Official source: Siemens ProductCERT

SSA-242944

SSA-242944: Node2Shell Vulnerability in Siemens Industrial Products

Siemens — COMOS Walkinside

Siemens ProductCERTcritical

Published

10 November 2026

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

On October 21, 2026, the Node.js project released security updates addressing a critical vulnerability in the Brotli decoder bundled with Node.js, commonly referred to as "Node2Shell" (tracked as CVE-2026-111497). The vulnerability is an out-of-bounds write that could allow a remote attacker to cause memory corruption and potentially execute arbitrary code. This advisory covers the status of impact of various Siemens products. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fixes and recommends specific mitigations for products where fixes are not or not yet available.

Mitigation summary

Temporarily disable Brotli compression and decompression at the application or proxy layer if it is not strictly required

Revision history (1)
  1. Initial publication — 10 November 2026

    Publication Date

Official source: Siemens ProductCERT

SSA-282044

SSA-282044: DLL Hijacking Vulnerability in Siemens Web Installer used by the Online Software Delivery

Siemens — Automation License Manager V6.0

Siemens ProductCERThigh

Published

12 August 2025

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

The installers used to install several Siemens products are affected by a DLL hijacking vulnerability. This could allow an attacker to execute arbitrary code when a legitimate user installs an application that uses the affected installer component. This vulnerability poses a risk only during setup and installation phase of the affected applications downloaded e.g. via OSD (Online Software Delivery). Siemens has released new versions for several affected products and recommends using the latest versions during setup and installation. Siemens is preparing further fixes and recommends specific countermeasures for products where fixes are not or not yet available.

Mitigation summary

Harden the application host to prevent local access by untrusted personnel

Revision history (4)
  1. Initial publication — 12 August 2025

    Publication Date

  2. Update A — 9 September 2025

    Added Sahil Shah to acknowledgment; Added fix for SIMATIC Energy Suite V19, SIMATIC Energy Suite V20, SIMATIC MTP CREATOR V4.x, SIMATIC Control Function Library (CFL) V3.x, TIA Portal Test Suite V19, TIA Portal Test Suite V20, SIMATIC WinCC Visualization Architect V19, SIMATIC WinCC Visualization Architect V20, SIMATIC S7-PCT; Updated No fix planned for SIMATIC ProSave V17,SIMATIC WinCC flexible ES, SIMATIC Control Function Library (CFL) V1.x, SIMATIC Control Function Library (CFL) V2.x

  3. Update B — 14 October 2025

    Added fix for MTP Creator V2.x, CFL V4.x, Simatic WinCC Unified Line Coordination and Simatic WinCC Unified Sequence

  4. Update C — 11 November 2025

    Added Fixes for PCS 7 Logic Matrix V9.1, PCS7 Advanced Process Faceplates V9.1, SIMATIC PCS 7 Basis Faceplates V9.1 PCS 7 Basis Library V9.1, SIMATIC Management Agent V9.1, SIMATIC Management Console V9.1, PCS 7 V9.1, PCS 7 V10.0

Official source: Siemens ProductCERT

SSA-390352

SSA-390352: Multiple Vulnerabilities in .NET Client Library for SIMATIC S7 Webserver API

Siemens — .NET Client Library for SIMATIC S7 Webserver API

Siemens ProductCERThigh

Published

13 October 2026

Last update

10 November 2026

Affected sectors

Risk evaluation

.NET Client Library for SIMATIC S7 Webserver API contains multiple vulnerabilities that could allow an attacker to obtain sensitive information or write arbitrary files outside the intended download directory. Siemens has released a new version for .NET Client Library for SIMATIC S7 Webserver API and recommends to update to the latest version.

Mitigation summary

Update to V3.3.61 or later version

Revision history (2)
  1. Initial publication — 13 October 2026

    Publication Date

  2. Update A — 10 November 2026

    Added researcher acknowledgement

Official source: Siemens ProductCERT

SSA-392349

SSA-392349: Denial of Service Vulnerability in Industrial Devices

Siemens — IE/PB LINK HA (6GK1411-5BB00)

Siemens ProductCERThigh

Published

12 May 2026

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

Multiple industrial devices contain a vulnerability that could allow an attacker to cause a denial of service condition. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.

Mitigation summary

As a mitigation, disable the ethernet ports on the CPU and use a communication module (like CP) for communication instead

Revision history (4)
  1. Initial publication — 12 May 2026

    Publication Date

  2. Update A — 14 July 2026

    Added fix for SCALANCE SC-600 family

  3. Update B — 11 August 2026

    Added fix for IE/PB LINK HA

  4. Update C — 10 November 2026

    Updated the fix for IE/PB LINK HA to Currently no fix is available.

Official source: Siemens ProductCERT

SSA-434797

SSA-434797: Buffer Overflow Vulnerability in OpenSSL affecting Siemens Products

Siemens — AI Lightweight Inference Server

Siemens ProductCERThigh

Published

9 June 2026

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

OpenSSL has published a stack based buffer overflow vulnerability that allows a remote attacker to cause a denial of service (DoS) or potentially allow for remote code execution. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fixes and recommends specific mitigations for products where fixes are not or not yet available.

Mitigation summary

As a defense-in-depth measure, organizations may review whether affected systems are exposed to untrusted CMS/PKCS#7 content from external sources.

Revision history (4)
  1. Initial publication — 9 June 2026

    Publication Date

  2. Update A — 14 July 2026

    Added SCALANCE X-200 family, X-200IRT family, X-200RNA family, X-300/408 family, SC-600 family to Known Not Affected and fix for SINUMERIK Access MyMachine /OPC UA , SIMOVE Fleetmanager. Updated remediation to No fix planned for SIMATIC Comfort/Mobile RT

  3. Update B — 11 August 2026

    Added RUGGEDCOM ROX II family and SIMATIC HMI Operator Device to Known Not Affected and removed SIMATIC Comfort/Mobile RT and updated SIMATIC Advanced HMI Panels and SIMATIC HMI Basic Panels to no fix available; Added fix for SIMATIC PDM V9.3 and added PCS neo V6.0 and Simatic Logon to affected products.

  4. Update C — 8 September 2026

    Updated remediation for AI Lightweight Inference Server to no fix planned.

Official source: Siemens ProductCERT

SSA-435267

SSA-435267: Code Injection Vulnerability in ROS# Before 2.3.1

Siemens — ROS#

Siemens ProductCERThigh

Published

10 November 2026

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

ROS# before version 2.3.1 contains a code injection vulnerability that could allow an attacker that is able to pass a crafted message definition file to the user to inject arbitrary code into the generated program. Siemens has released a new version for ROS# and recommends to update to the latest version.

Mitigation summary

Update to V2.3.1 or later version

Revision history (1)
  1. Initial publication — 10 November 2026

    Publication Date

Official source: Siemens ProductCERT

SSA-457936

SSA-457936: Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1.7

Siemens — SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)

Siemens ProductCERTcritical

Risk evaluation

Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1.7 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). Siemens is preparing fixes and recommends specific mitigations for products where fixes are not or not yet available.

Mitigation summary

Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.

Revision history (2)
  1. Initial publication — 13 October 2026

    Publication Date

  2. Update A — 10 November 2026

    Added 65 new CVEs

Official source: Siemens ProductCERT

SSA-493396

SSA-493396: Deserialization Vulnerability in Siemens Engineering Platforms

Siemens — SIMATIC S7-PLCSIM V17

Siemens ProductCERThigh

Published

12 August 2025

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

Affected products do not properly sanitize user-controllable input when parsing project files. This could allow an attacker to cause a type confusion and execute arbitrary code within the affected application. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.

Mitigation summary

Only open projects from trusted sources.

Revision history (4)
  1. Initial publication — 12 August 2025

    Publication Date

  2. Update A — 14 October 2025

    Added fix for TIA Portal V20

  3. Update B — 9 December 2025

    Added fix for Totally Integrated Automation Portal (TIA Portal) V17

  4. Update C — 13 October 2026

    Added fix version for SIMATIC STEP 7 V18, and SIMATIC WinCC V18

Official source: Siemens ProductCERT

SSA-651988

SSA-651988: Double Free vulnerability in Fortigate NGFW before V7.6.9 on RUGGEDCOM APE1808 Devices

Siemens — RUGGEDCOM APE1808

Siemens ProductCERTlow

Published

10 November 2026

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

Fortinet has published information on a Double Free vulnerability in FortiOS. This advisory lists the related Siemens Industrial products. Siemens recommends to update Fortigate NGFW to V7.6.9 or later following the secure update recommendation procedure. Contact customer support to receive detailed information

Mitigation summary

Update Fortigate NGFW to V7.6.9 or later following the secure update recommendation procedure. Contact customer support to receive detailed information

Revision history (1)
  1. Initial publication — 10 November 2026

    Publication Date

Official source: Siemens ProductCERT

SSA-678870

SSA-678870: Node2Shell/Broccoli2Shell Vulnerabilities in Siemens Software Products

Siemens — Calibre

Siemens ProductCERTcritical

Published

10 November 2026

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

On October 21, 2026, the Node.js project released security updates addressing a critical vulnerability in the Brotli decoder bundled with Node.js, commonly referred to as "Node2Shell" (tracked as CVE-2026-111497). The vulnerability is an out-of-bounds write that could allow a remote attacker to cause memory corruption and potentially execute arbitrary code. This advisory covers the status of impact of various Siemens software products. Please also have a look on following Software Field Bulletins: Teamcenter: https://support.sw.siemens.com/en-US/knowledge-base/PL8869204 Polarion: https://support.sw.siemens.com/en-US/knowledge-base/PL8869197 Manufacturing Operations Center (Opcenter) and Process Preparation X: https://support.sw.siemens.com/en-US/knowledge-base/PL8869211 Siemens is preparing fixes and recommends specific mitigations for products where fixes are not or not yet available.

Mitigation summary

Disable brotli compression and block brotli compression at the network firewall.

Revision history (1)
  1. Initial publication — 10 November 2026

    Publication Date

Official source: Siemens ProductCERT

SSA-693808

SSA-693808: Deserialization Vulnerability in Siemens Engineering Platforms

Siemens — SIMATIC PCS neo V4.1

Siemens ProductCERThigh

Published

12 August 2025

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

Affected products do not properly restrict access permissions to a local Windows Named Pipe and do not properly sanitize user-controllable input sent to that Named Pipe. This could allow a local authenticated attacker to cause a type confusion and execute arbitrary code within the affected application and its privileges. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.

Mitigation summary

On Desktop systems: Execute affected software on Windows hosts where only a single user is configured

Revision history (4)
  1. Initial publication — 12 August 2025

    Publication Date

  2. Update A — 14 October 2025

    Added no fix expected for PCS neo V5.0, added fix for TIA Portal V20

  3. Update B — 9 December 2025

    Added fix for Totally Integrated Automation Portal (TIA Portal) V17

  4. Update C — 9 June 2026

    Added fix for SIMATIC PCS NEO V6.0

Official source: Siemens ProductCERT

SSA-724261

SSA-724261: Command Injection Vulnerability in meta-iot2050

Siemens — meta-iot2050

Siemens ProductCERThigh

Published

10 November 2026

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

meta-iot2050 (https://github.com/siemens/meta-iot2050) from V01.03.01 contains a Command Injection vulnerability in the firmware update tool that could allow an attacker which is able to manipulate a configuration file to have arbitrary commands run as root. Siemens is preparing fixes and recommends mitigations for products where fixes are not or not yet available.

Mitigation summary

Currently no fix is available

Revision history (1)
  1. Initial publication — 10 November 2026

    Publication Date

Official source: Siemens ProductCERT

SSA-800126

SSA-800126: Deserialization Vulnerability in Siemens Engineering Platforms before V20

Siemens — SIMATIC S7-PLCSIM V16

Siemens ProductCERThigh

Published

10 December 2024

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

Affected products do not properly sanitize user-controllable input when parsing files. This could allow an attacker to cause a type confusion and execute arbitrary code within the affected application. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific countermeasures for products where fixes are not, or not yet available. Siemens has released products based on the Totally Integrated Automation Portal (TIA Portal) V20 which are not affected by CVE-2024-49849. See the chapter "Additional Information" below for more details.

Mitigation summary

Avoid opening untrusted files from unknown sources in affected products

Revision history (4)
  1. Initial publication — 10 December 2024

    Publication Date

  2. Update A — 12 August 2025

    Added fix for Totally Integrated Automation Portal (TIA Portal) V19; Name of SIMOTION SCOUT TIA V5.6 SP1 was updated to SIMOTION SCOUT TIA V5.6 and Name of SIMOTION SCOUT TIA V5.5 SP1 was updated to SIMOTION SCOUT TIA V5.5; Removed entry for SIMOTION SCOUT TIA V5.4 SP1 as the product is renamed to SIMOTION SCOUT TIA V5.4 which is mentioned in TIA portal; Name of SIMOTION SCOUT TIA V5.4 SP3 was updated to SIMOTION SCOUT TIA V5.4

  3. Update B — 9 December 2025

    Added fix for Totally Integrated Automation Portal (TIA Portal) V17

  4. Update C — 13 October 2026

    Added fix version for SIMATIC STEP 7 Safety V18, SIMATIC STEP 7 V18, SIMATIC WinCC Unified V18, SIMATIC WinCC V18, TIA Portal Cloud V18

Official source: Siemens ProductCERT

SSA-834709

SSA-834709: Missing Authentication Vulnerability in Node-RED on SIMATIC IoT2050 with Industrial OS

Siemens — SIMATIC IoT2050 Advanced (6ES7647-0BA00-1YA2)

Siemens ProductCERTcritical

Published

11 August 2026

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

SIMATIC IoT2050 devices running Industrial OS with Node-RED installed contain a missing authentication vulnerability in the Node-RED HTTP interface that could allow an unauthenticated remote attacker to create malicious flows and execute arbitrary code on the underlying server with maximum privileges. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fixes and recommends specific mitigations for products where fixes are not or not yet available.

Mitigation summary

Harden the Node-RED installation (see Node-RED User Guide)

Revision history (3)
  1. Initial publication — 11 August 2026

    Publication Date

  2. Update A — 4 November 2026

    Clarified Affected products list. Updated title. Updated summary.

  3. Update B — 10 November 2026

    Added additional affected configuration for SIMATIC IoT2050 family

Official source: Siemens ProductCERT

SSA-904646

SSA-904646: Sensitive Data Exposure Vulnerability in SIPROTEC 5 Devices

Siemens — SIPROTEC 5 6MD84 (CP300)

Siemens ProductCERTmiddel

Published

8 July 2025

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

A sensitive data exposure vulnerability in SIPROTEC 5 can allow an attacker to retrieve sensitive session data from browser history, logs, or other storage mechanisms, potentially leading to unauthorized access. Siemens has released new versions for the affected products and recommends to update to the latest versions.

Mitigation summary

Update to V11.0 or later version

Revision history (3)
  1. Initial publication — 8 July 2025

    Publication Date

  2. Update A — 12 May 2026

    Added fix for SIPROTEC 5 CP150, CP300 and SIPROTEC 5 Compact 7SX800 (CP050) devices and added SIPROTEC 5 CP200 devices to Known Not Affected products

  3. Update B — 10 November 2026

    Added fix for SIPROTEC 5 CP100 devices

Official source: Siemens ProductCERT

SSA-970803

SSA-970803: Insecure User Authentication in SIMATIC SCADA and PCS 7 systems

Siemens — SIMATIC BATCH V9.1

Siemens ProductCERThigh

Published

10 November 2026

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

The products listed below contain an authentication bypass vulnerability that could allow an on-path attacker to take over the session of a legitimate user and execute arbitrary code with the privileges of the victim user. Siemens is preparing fixes and recommends specific mitigations for products where fixes are not or not yet available.

Mitigation summary

Customers can manually configure the SQL Server Database for encrypting communication as described in https://support.industry.siemens.com/cs/mdm/109818202?c=145291786635&lc=en-ID

Revision history (1)
  1. Initial publication — 10 November 2026

    Publication Date

Official source: Siemens ProductCERT

SSA-979641

SSA-979641: Implicit Execution of Active Content when Opening Files Vulnerability in SIMATIC WinCC Graphics Designer

Siemens — SIMATIC WinCC V7.5

Siemens ProductCERThigh

Published

10 November 2026

Last update

10 November 2026

Linked CVEs

Affected sectors

Risk evaluation

Graphics Designer of SIMATIC WinCC before V8.2 contains an implicit active content execution vulnerability upon opening files, which could allow an attacker to cause arbitrary code execution on the device. Siemens is preparing fixes and recommends specific mitigations for products where fixes are not or not yet available.

Mitigation summary

The affected product may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with the affected product. Also make sure to only open files from trusted sources.

Revision history (1)
  1. Initial publication — 10 November 2026

    Publication Date

Official source: Siemens ProductCERT

SA26P003

OpenSSL Vulnerabilities in B&R products

B&R Industrial Automation GmbH — mapp View

ABB PSIRTcritical

Published

9 November 2026

Last update

9 November 2026

Affected sectors

Risk evaluation

B&R is aware of public reports of a vulnerability in the product versions listed as affected in the advisory. An attacker who successfully exploited this vulnerability could cause the product to stop or insert and run arbitrary code.

Mitigation summary

The problem is corrected in the following product versions: - mapp View 6.6.0 - B&R Live Utils 3.0.2 - B&R Linux 12 1.1.1 - PPC80 1.8.2 - PPT50 1.8.0 - PPC50 1.8.0 - PPT80 1.8.2 - PFT51 1.8.2 - PFT50 1.8.0 - PPT30 1.8.0 - Terminal OS 1.8.0 - ADI OPC UA Server 3.0.0 B&R recommends that impacted customers apply the update at earliest convenience. The process to install updates is described in the user manual. The step to identify the installed product version is described in the user manual.

Revision history (1)
  1. Initial publication — 9 November 2026

    Initial version.

Official source: ABB PSIRT

VDE-2025-081

WAGO: Multiple PLCs and Communication Components are Affected by multiple Vulnerabilities leading to RCE

WAGO — CC100

WAGO PSIRThigh

Published

6 November 2026

Last update

6 November 2026

Affected sectors

Risk evaluation

Multiple WAGO devices are affected by CODESYS Control vulnerabilities. The affected WAGO firmware versions are <4.10.0 (FW32) and <4.10.0 (70).

Mitigation summary

Update to Firmware version 4.10.0 (FW32) or higher. For the latest Custom Firmware please contact the WAGO support.

Revision history (2)
  1. Initial publication — 21 September 2026

    Release version.

  2. Update A — 6 November 2026

    Removed WP400 and added PFC300. Edited typos in the CVEs scores.

Official source: WAGO PSIRT

sca-2026-0017

SICK Products affected by Brotli Vulnerability (Broccoli2Shell)

SICK — Localization systems

SICK PSIRTcritical

Published

6 November 2026

Last update

6 November 2026

Linked CVEs

Affected sectors

Risk evaluation

SICK identified multiple products affected by the Brotli vulnerability, also known as Broccoli2Shell (CVE-2026-111497). Successful exploitation of this vulnerability could impact the confidentiality, integrity, and availability of affected systems. At the time of publication, SICK is not aware of any active exploitation of this vulnerability targeting SICK products. SICK strongly recommends that customers review and implement the remediation measures provided in this advisory to reduce potential security risks.

Mitigation summary

Users are recommended to re-install or upgrade to version 2026.1.3 while setting the global.imagePullPolicy to 'IfNotPresent'.

Revision history (1)
  1. Initial publication — 6 November 2026

    Initial version

Official source: SICK PSIRT

4TLB000837

IPEC Standalone iSM PHP2Shell and NTFS-3G Vulnerabilities

ABB — IPEC iSM Local Server

ABB PSIRTcritical

Risk evaluation

ABB is aware of public reports of vulnerabilities in third-party components (PHP and NTFS-3G) included in the product versions listed as affected in the advisory. An attacker who successfully exploited these vulnerabilities may insert and run arbitrary code on affected products. No active exploitations of the vulnerabilities have been reported to ABB by the time of writing this document. ABB will inform affected customers if this changes.

Mitigation summary

For the products and version numbers listed below, please apply the relevant software patches according to the instructions provided by your ABB contact. - IPEC iSM Local Server: Debian 11 (Bullseye) - IPEC iSM Local Server: Debian 12 (Bookworm) - IPEC iSM Local Server: Debian 13 (Trixie) If further support is required to install the patches, please contact IPEC Sales (ipec.sales@gb.abb.com). Installation support may be chargeable where not covered by your existing warranty, maintenance or support agreement. ABB recommends that customers apply the update as soon as possible.

Revision history (1)
  1. Initial publication — 6 November 2026

    Initial version.

Official source: ABB PSIRT

2NGA003256

Netcontrol 100, 200, 500, GW502-iM, NAM PHP2Shell Critical Vulnerabilities

ABB — Netcontrol Netcon 100 (GW102)

ABB PSIRTcritical

Published

30 October 2026

Last update

6 November 2026

Affected sectors

Risk evaluation

ABB is aware of publicly reported information concerning recently disclosed PHP vulnerabilities that impact the product versions listed as affected in the advisory. An attacker who successfully exploited this vulnerability may insert and run arbitrary code on affected products.

Mitigation summary

The problem is corrected in the following software release packages published for products: - Netcon 200 (GWDD-A03): Software release A103.03.020 published Nov-2-2026 ABB recommends that customers apply the update at earliest convenience. The process to install updates and identify the installed product version is described in the user manual and release note document attached to installation package.

Revision history (2)
  1. Initial publication — 6 November 2026

    Added Netcontrol Netcon GW502-iM and updated Recommended Immediate Actions section after new software release for Netcon 200 (GWDD-A03) product.

  2. Update A — 30 October 2026

    Initial version.

Official source: ABB PSIRT

SSA-443410

SSA-443410: Node2Shell Vulnerability in Industrial Edge Management Applications

Siemens — Cloud Connector Configurator

Siemens ProductCERTcritical

Published

30 October 2026

Last update

6 November 2026

Linked CVEs

Affected sectors

Risk evaluation

Siemens is currently assessing the impact of Node2Shell (CVE-2026-111497) on Industrial Edge. Please check your Industrial Edge Management (IEM) setup: - No Management Applications installed: No action is required. Although the affected Brotli library is included in the IEM software stack, the affected functionality is not used or exposed. The same applies to IEDK. - Management Applications installed: Follow the specific mitigations until a fix is available. - Device Applications installed: Follow the specific mitigations until a fix is available. For Siemens-managed services, Industrial Edge Hub and Industrial Edge Management Cloud, appropriate Firewall/WAF protection has already been implemented. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fixes and recommends specific mitigations for products where fixes are not or not yet available.

Mitigation summary

Stop Common Configurator on Device (CC on Edge) until a fix is available

Revision history (2)
  1. Initial publication — 30 October 2026

    Publication Date

  2. Update A — 6 November 2026

    Added fix for Cloud Connector Configurator, Data Flow Monitoring, Databus Configurator, Edge OPC UA Server Configurator and Flow Creator Configurator; Added DataXess Configurator as affected product

Official source: Siemens ProductCERT

FSA-202603

Two critical PHP vulnerabilities in several Festo Didactic products

Festo — FactoryViews

Festo PSIRTcritical

Published

2 November 2026

Last update

5 November 2026

Affected sectors

Risk evaluation

Festo Didactic FactoryViews and MES4 deployed along with xampp bundle an Apache web server with PHP. The bundled version of PHP is vulnerable to the two critical vulnerabilities CVE-2026-109618 and CVE-2026-109619 (commonly referred to as PHP2Shell). These vulnerabilities allow an attacker to remotely execute code on the FactoryViews or xampp host system.

Mitigation summary

Install patch 1.12.2 through the "Versions" page of the FactoryViews control panel on version 1.12.0 or 1.12.1. Versions of FactoryViews prior to 1.12 must first be updated to 1.12 available for download here: https://www.festo.com/de/de/support-portal-specific?query=factoryviews&groupId=4&productName=factoryviews&documentId=659952

Revision history (2)
  1. Initial publication — 2 November 2026

    Initial Revision

  2. Update A — 5 November 2026

    Adjusted information about vendor fix for FactoryViews

Official source: Festo PSIRT