Skip to content
IACS RadarIndustrial Cyber Exposure & Intelligence

CISA + vendors

ICS Advisories

Advisories specifically aimed at industrial control systems — from CISA ICS-CERT and directly from vendors (including Siemens, ABB, Schneider Electric, WAGO and Phoenix Contact) — including revision history (initial publication, Update A, Update B) and linked CVEs.

499

Found

Advisory data: live connection— last retrieved: 20 November 2026 at 22:19.

Filters

499 advisories found

Advisory2025-06_VDE-2025-049

CODESYS Control V3 - Insecure default permissions

CODESYS — CODESYS Runtime Toolkit

CODESYS PSIRTmiddel

Published

4 August 2025

Last update

4 August 2025

Linked CVEs

Affected sectors

Risk evaluation

On certain operating systems (e.g., Linux), default file system permissions may allow read access to the files of the CODESYS Control runtime system for non-administrator users. The documentation provided with the CODESYS Runtime Toolkit does not explicitly address this risk. As a result, products based on the toolkit may unintentionally expose sensitive runtime files to local operating system users with limited privileges. CODESYS Control runtime system based devices are affected if they provide access to the operating system (e.g., via a local user interface or SSH) and user accounts without administrator rights for this access exist or can be created.

Mitigation summary

If the CODESYS Control runtime system is operated on an operating system with multi-user support, other users may potentially gain access to runtime-related files. Thus, it is essential to configure the storage locations for CODESYS Control runtime files in accordance with the operating system's security best practices. These locations should, by default, restrict access to unauthorized users. If the operating system does not support such access control mechanisms or if implementing them is not feasible, an alternative approach is to explicitly revoke read and write permissions for all non-administrative users on the directories used by the CODESYS Control runtime system. The following directories must be secured: * The directory containing configuration files * The directory containing binary files * The working directory used by the runtime system Note: Protecting individual files is not sufficient. The entire directories must be secured to ensure that any files created in the future are also protected. Alternatively, where applicable, all non-administrative user accounts can be removed from the system, and their re-creation should be prevented. Additionally, it is recommended to disable remote access methods that allow file access (e.g., SSH) wherever possible, in order to reduce the overall attack surface. Best practice recommendations for Linux and QNX Systems: * Create a dedicated privileged group for accessing the above-mentioned directories, and add the user account under which the runtime process is executed to this group. * Set the file system permissions for these directories to deny access to "other" users (e.g., chmod o-rx). * If access for additional users is required, they can be added to the privileged group as needed.

Revision history (1)
  1. Initial publication — 4 August 2025

    Initial revision.

Official source: CODESYS PSIRT

VDE-2025-065

MB connect line: Sandbox escape in mbNET's LUA interpreter

MB connect line — mbNET HW1

MB connect line PSIRThigh

Published

31 July 2025

Last update

31 July 2025

Linked CVEs

Affected sectors

Risk evaluation

An authenticated remote attacker can exploit an undocumented method to escape the LUA sandbox in mbNET devices, enabling the execution of arbitrary operating system commands and leading to full system compromise.

Mitigation summary

Update mbNET/mbNET.rokey to at least version 7.3.0\ **Note**: mbNET HW1 is EOL and will not receive any further updates.

Revision history (1)
  1. Initial publication — 31 July 2025

    Initial revision.

Official source: MB connect line PSIRT

VDE-2025-069

Helmholz: Sandbox escape in REX200/250 LUA interpreter

Helmholz — REX 300

Helmholz PSIRThigh

Published

31 July 2025

Last update

31 July 2025

Linked CVEs

Affected sectors

Risk evaluation

An authenticated remote attacker can exploit an undocumented method to escape the LUA sandbox in REX200/250 devices, enabling the execution of arbitrary operating system commands and leading to full system compromise.

Mitigation summary

Update REX 200/250 to at least version 7.3.0\ **Note**: REX 300 is EOL and will not receive any further updates.

Revision history (1)
  1. Initial publication — 31 July 2025

    Initial revision.

Official source: Helmholz PSIRT

FSA-202207

Festo: CPX-CEC-C1 and CPX-CMXX, Missing Authentication for Critical Webpage Function

Festo — Control block CPX-CEC-C1

Festo PSIRThigh

Published

20 September 2022

Last update

28 July 2025

Linked CVEs

Affected sectors

Risk evaluation

Unauthenticated access to critical webpage functions (e.g. reboot) may cause a denial of service of the device.

Mitigation summary

Currently no fix is planned. Festo recommends limiting access to the webserver (tcp port 80) of the device to what is absolutely necessary. Replace CPX-CEC-C1 with follow-up product CPX-CEC-C1-V3. Replace CPX-CMXX with follow up product CPX-CEC-M1-V3.

Revision history (4)
  1. Initial publication — 20 September 2022

    Initial revision.

  2. Update A — 19 October 2022

    Added Control block-Set CPX-CEC-C1 and Control block-SET CPX-CMXX to affected products.

  3. Update B — 11 January 2024

    Adjust link to VDE Advisory

  4. Update C — 28 July 2025

    Adjusted to VDE template. Change title from 'CPX-CEC-C1 and CPX-CMXX, Missing Authentication for Critical Webpage Function' to 'Festo: CPX-CEC-C1 and CPX-CMXX, Missing Authentication for Critical Webpage Function'. Updated legal disclaimer to add references to special provisions. Remediations were consolidated into one.

Official source: Festo PSIRT

VDE-2025-052

Weidmueller: Security routers IE-SR-2TX are affected by multiple vulnerabilities

Weidmüller — IE-SR

Weidmüller PSIRTcritical

Published

11 June 2025

Last update

23 July 2025

Affected sectors

Risk evaluation

Weidmueller security routers IE-SR-2TX are affected by multiple vulnerabilities (CVE-2025-41661, CVE-2025-41663, CVE-2025-41683, CVE-2025-41684, CVE-2025-41687). Weidmueller has released new firmware versions of the affected products to fix the vulnerabilities. **Update Version 1.1.0:** Added CVEs CVE-2025-41683, CVE-2025-41684 and CVE-2025-41687. Updated CVSS Score for CVE-2025-41663. Removed CVE-2025-41662.

Mitigation summary

Update to version V1.49

Revision history (2)
  1. Initial publication — 11 June 2025

    Initial version

  2. Update A — 23 July 2025

    Added CVEs CVE-2025-41683, CVE-2025-41684 and CVE-2025-41687. Updated CVSS Score for CVE-2025-41663. Removed CVE-2025-41662.

Official source: Weidmüller PSIRT

VDE-2025-058

MB connect line: Multiple vulnerabilities in mbNET.mini

MB connect line — mbNET.mini

MB connect line PSIRThigh

Risk evaluation

Multiple vulnerabilities in all mbNET.mini devices with firmware <= 2.3.2 that allow an attacker to gain full control over the device.

Mitigation summary

As this is an authenticated exploit, you can mitigate it by making sure that no malicious actor can login to a vulnerable device.

Revision history (1)
  1. Initial publication — 21 July 2025

    Initial revision.

Official source: MB connect line PSIRT

VDE-2025-059

Helmholz: Multiple vulnerabilities in REX 100

Helmholz — REX 100

Helmholz PSIRThigh

Risk evaluation

Multiple vulnerabilities in all REX 100 devices with firmware <= 2.3.2 that allow an attacker to gain full control over the device.

Mitigation summary

As this is an authenticated exploit, you can mitigate it by making sure that no malicious actor can login to a vulnerable device.

Revision history (1)
  1. Initial publication — 21 July 2025

    Initial revision.

Official source: Helmholz PSIRT

FSA-202203

Festo: Controller CECC-S,LK,D family firmware 2.4.2.0 - multiple vulnerabilities in CODESYS V3 runtime system

Festo — Controller CECC-D

Festo PSIRTcritical

Risk evaluation

The Festo controller CECC product family in firmware version 2.4.2.0 is affected by multiple vulnerabilities in the CODESYS V3 runtime.

Mitigation summary

No fix planned. This issue will be handled with next hardware generation release.

Revision history (3)
  1. Initial publication — 18 July 2022

    Initial version.

  2. Update A — 11 January 2024

    Adjust link to VDE Advisory, TLP and update some CVE information, where CVSS was not known before.

  3. Update B — 10 July 2025

    Adjusted to VDE template. Changed document title from 'Festo Controller CECC-S,-LK,-D Family Firmware = 2.4.2.0 - Multiple Vulnerabilities in CODESYS V3 Runtime System' to' Festo: Controller CECC-S,LK,D family firmware 2.4.2.0 - multiple vulnerabilities in CODESYS V3 runtime system'. Updated legal disclaimer to add references to special provisions.

Official source: Festo PSIRT

VDE-2025-057

WAGO: Vulnerability in WAGO Device Sphere

WAGO — Device Sphere

WAGO PSIRTcritical

Published

23 June 2025

Last update

7 July 2025

Linked CVEs

Affected sectors

Risk evaluation

During installation, identical certificates are installed across all systems instead of unique ones, which are intended for JWT Token encryption and signing.

Mitigation summary

Update to WAGO Device Sphere version 1.0.1. WAGO Device Sphere version 1.0 can't be used after the 30.06.2025.

Revision history (2)
  1. Initial publication — 12 June 2025

    Initial release.

  2. Update A — 7 July 2025

    fixed typo in CVE-ID

Official source: WAGO PSIRT

PPSA-2025-002

Pilz: Missing Authentication in Node-RED integration

Pilz — IndustrialPI 4

Pilz PSIRTcritical

Published

1 July 2025

Last update

1 July 2025

Linked CVEs

Affected sectors

Risk evaluation

Authentication is not configured by default for the Node-RED server on the Pilz industrial PC IndustrialPI. An unauthenticated remote attacker has full access to the Node-RED server and can run arbitrary operating system commands on the underlying operating system with privileged rights.

Mitigation summary

Consult our PDF with remediations which you can find under [www.pilz.com/downloads](https://www.pilz.com/search#currentPage=1&SEARCH=Security%20Advis.%20IndustrialPI%20Remediat.). In order to activate the authentication as described in the PDF, you have to have the Node-RED service enabled via the web application.

Revision history (1)
  1. Initial publication — 1 July 2025

    Initial Version

Official source: Pilz PSIRT

PPSA-2025-003

Pilz: Authentication Bypass in IndustrialPI Webstatus

Pilz — IndustrialPI 4

Pilz PSIRTcritical

Published

1 July 2025

Last update

1 July 2025

Linked CVEs

Affected sectors

Risk evaluation

The Pilz industrial PC IndustrialPI webstatus application is vulnerable to an authentication bypass.

Mitigation summary

Update the webstatus package to version 2.4.6 via the 'apt' package manager. Use 'sudo apt update && sudo apt upgrade -y' to pull and install all available updates for the IndustrialPI. To check the version of the webstatus package, use 'dpkg -l | grep revpi-webstatus'.

Revision history (1)
  1. Initial publication — 1 July 2025

    Initial Version

Official source: Pilz PSIRT

PPSA-2025-001

Pilz: Authentication Bypass and Cross-Site-Scripting in PiCtory

Pilz — IndustrialPI 4

Pilz PSIRTcritical

Published

30 June 2025

Last update

30 June 2025

Affected sectors

Risk evaluation

PiCtory, a web application to configure the Pilz industrial PC IndustrialPI, has three vulnerabilities with varying degrees of severity. The first two are of critical severity and can lead to a bypass of authentication and a cross-site-scripting attack. The third vulnerability with medium severity puts PiCtory at a risk of a reflected cross-site-scripting attack.

Mitigation summary

Update the PiCtory package to version 2.12 via the 'apt' package manager. Use 'sudo apt update && sudo apt upgrade -y' to pull and install all available updates for the IndustrialPI. To check the version of the pictory package, use 'dpkg -l | grep pictory'.

Revision history (1)
  1. Initial publication — 30 June 2025

    Initial Version

Official source: Pilz PSIRT

VDE-2025-043

Lenze: PLC Designer V4 with insecure storage of sensitive information

Lenze — PLC Designer V4

Lenze PSIRTmiddel

Published

25 June 2025

Last update

25 June 2025

Linked CVEs

Affected sectors

Risk evaluation

A security vulnerability was discovered in the PLC Designer V4 in the version 4.0.0 where the programmer of a Controller can set a password for the connected device. Here it is possible in an interface of the PLC Designer V4 for the programmer to enter a password for the Device. There is a special constellation where the password entered appears in plain text. Only the display in the tool is affected and not the management of the password on the device. This vulnerability of PLC Designer V4 only occurs in combination with the devices c430 controller, c520 controller and c550 controller and not in combination with other devices, as this functionality is only used here. It is generally recommended that all users update to 4.0.1, but especially all users who operate PLC Designer V4 in combination with the controllers mentioned.

Mitigation summary

This vulnerability has been fixed in the new version. All users are strongly recommended to use the new version 4.0.1.

Revision history (1)
  1. Initial publication — 25 June 2025

    Initial Version

Official source: Lenze PSIRT

VDE-2025-035

Vulnerabilities in mbCONNECT24/mymbCONNECT24

MB connect line — mbCONNECT24

MB connect line PSIRThigh

Published

24 June 2025

Last update

24 June 2025

Affected sectors

Risk evaluation

Two vulnerabilities in mbCONNECT24/mymbCONNECT24 can lead to user enumeration an password bypass.

Mitigation summary

Update to latest version: 2.16.5

Revision history (1)
  1. Initial publication — 24 June 2025

    Initial revision.

Official source: MB connect line PSIRT

VDE-2025-034

Vulnerabilities in mbCONNECT24/mymbCONNECT24

MB connect line — mbCONNECT24

MB connect line PSIRThigh

Published

24 June 2025

Last update

24 June 2025

Linked CVEs

Affected sectors

Risk evaluation

The mb24api endpoint reachable when connected via VPN is missing authentication for sensitive functions. This can lead to information disclosure of user- and device names and to DoS.

Mitigation summary

Update to latest version: 2.18.0

Revision history (1)
  1. Initial publication — 24 June 2025

    Initial revision.

Official source: MB connect line PSIRT

VDE-2025-038

Vulnerabilities in myREX24/myREX24.virtual

Helmholz — myREX24

Helmholz PSIRThigh

Published

24 June 2025

Last update

24 June 2025

Affected sectors

Risk evaluation

Two vulnerabilities in myREX24/myREX24.virtual can lead to user enumeration an password bypass.

Mitigation summary

Update to latest version: 2.16.5

Revision history (1)
  1. Initial publication — 24 June 2025

    Initial revision.

Official source: Helmholz PSIRT

VDE-2025-037

Vulnerabilities in myREX24/myREX24.virtual

Helmholz — myREX24

Helmholz PSIRThigh

Published

24 June 2025

Last update

24 June 2025

Linked CVEs

Affected sectors

Risk evaluation

The mb24api endpoint reachable when connected via VPN is missing authentication for sensitive functions. This can lead to information disclosure of user- and device names and to DoS.

Mitigation summary

Update to latest version: 2.18.0

Revision history (1)
  1. Initial publication — 24 June 2025

    Initial revision.

Official source: Helmholz PSIRT

FSA-202201

Festo: CECC-X-M1 - command injection vulnerabilities

Festo — Controller CECC-X

Festo PSIRTcritical

Published

6 July 2022

Last update

23 June 2025

Affected sectors

Risk evaluation

The Festo controller CECC-X-M1 product family in multiple versions are affected by a preauthentication command injection vulnerability. Update A, 2022-07-05 Remediation has been updated. Fixed firmwares are now available.

Mitigation summary

Please update to firmware versions as described below: | Product | Product Details | Fixed in version | |-----------------------------|-----------------------------------------------------------|------------------| | Controller CECC-X-M1 | Festo:Partnumber:4407603 Festo:Ordercode:CECC-X-M1 | 3.8.18 | | Controller CECC-X-M1 | Festo:Partnumber:8124922 Festo:Ordercode:CECC-X-M1 | 4.0.18 | | Controller CECC-X-M1-MV | Festo:Partnumber:4407605 Festo:Ordercode:CECC-X-M1-MV | 3.8.18 | | Controller CECC-X-M1-MV | Festo:Partnumber:8124923 Festo:Ordercode:CECC-X-M1-MV | 4.0.18 | | Controller CECC-X-M1-MVS1 | Festo:Partnumber:4407606 Festo:Ordercode:CECC-X-M1-MV-S1 | 3.8.18 | | Controller CECC-X-M1-MVS1 | Festo:Partnumber:8124924 Festo:Ordercode:CECC-X-M1-MV-S1 | 4.0.18 | | Controller CECC-X-M1-YYJKP | Festo:Partnumber:4803891 Festo:Ordercode:CECC-X-M1-YYJKP | 3.8.18 | | Controller CECC-X-M1-YSL1 | Festo:Partnumber:8082793 Festo:Ordercode:CECC-X-M1-YS-L1 | 3.8.18 | | Controller CECC-X-M1-YSL2 | Festo:Partnumber:8082794 Festo:Ordercode:CECC-X-M1-YS-L2 | 3.8.18 | | Servo Press Kit YJKP | Festo:Partnumber:8077950 Festo:Ordercode:YJKP | 3.8.18 | | Servo Press Kit YJKP | Festo:Partnumber:8058596 Festo:Ordercode:YJKP | 3.8.18 |

Revision history (3)
  1. Initial publication — 6 July 2022

    Initial revision.

  2. Update A — 5 June 2025

    Fix: quotation mark

  3. Update B — 23 June 2025

    Changed Document ID

Official source: Festo PSIRT

VDE-2025-040

WAGO: Vulnerabilities in ctrlX OS app

WAGO — Edge Controller

WAGO PSIRThigh

Risk evaluation

The base ctrlX OS apps Device Admin and Solutions contain multiple vulnerabilities. In a worst case scenario, a remote authenticated (low-privileged) attacker might be able to execute arbitrary OS commands running with higher privileges.

Mitigation summary

Update to Solutions 2.6.1 which is available in the WAGO Download center.

Revision history (1)
  1. Initial publication — 16 June 2025

    Initial release.

Official source: WAGO PSIRT

VDE-2021-030

MB connect line: two vulnerabilities in mymbCONNECT24, mbCONNECT24 (Update A)

MB connect line — mbCONNECT24

MB connect line PSIRThigh

Published

7 September 2022

Last update

6 June 2025

Affected sectors

Risk evaluation

Two issues have been discovered in mymbCONNECT24 and mbCONNECT24 in all versionsincluding V2.8.0. Updated affected versions (and solution) due to incomplete fixes in previous versions

Mitigation summary

CVE-2021-34575: Update to 2.9.0 CVE-2021-34574: Update to 2.12.1

Revision history (3)
  1. Initial publication — 7 September 2022

    Initial revision.

  2. Update A — 7 September 2022

    Update A

  3. Update B — 6 June 2025

    Fixed CVE-IDs in Solution/Remidiation

Official source: MB connect line PSIRT

VDE-2024-014

WAGO: Multiple products affected by Terrapin

WAGO — PFC100

WAGO PSIRTmiddel

Published

22 February 2024

Last update

5 June 2025

Linked CVEs

Affected sectors

Risk evaluation

Several WAGO Firmwares are vulnerable to a to a remote attack which allows to bypass the integrity check through OpenSSH. This called Terrapin attack occurs because of mishandled handshake phase.

Mitigation summary

A fix for the affected Firmwares will be provided with the following firmware versions: - FW22, Patch 2 installed on 750-810x - FW22, Patch 2 installed on 750-821x - FW22, Patch 2 installed on 762-4x0x - FW22, Patch 2 installed on 762-5x0x - FW22, Patch 2 installed on 762-6x0x - FW22, Patch 2 installed on 752-8303 - FW27 installed on 750-811x - FW27 installed on 750-821x - FW27 installed on 751-9301 - FW27 installed on 751-9401 - FW27 installed on 762-4x0x - FW27 installed on 762-5x0x - FW27 installed on 762-6x0x - FW27 installed on 752-8303 - Custom Firmware 03.03.08 (80) installed on 750-820x - Custom Firmware 04.03.03 (72) installed on 751-9301 - Custom Firmware 04.03.03 (72) installed on 751-9401 - Custom Firmware 04.04.03 (70) installed on 750-821x

Revision history (2)
  1. Initial publication — 22 February 2024

    Initial revision.

  2. Update A — 5 June 2025

    Fix: version space

Official source: WAGO PSIRT

VDE-2022-044

Pilz: Multiple products affected by ZipSlip

Pilz — PAScal

Pilz PSIRTmiddel

Published

24 November 2022

Last update

5 June 2025

Linked CVEs

Affected sectors

Risk evaluation

Several Pilz software products do not properly check pathnames contained in archives. An attacker can utilise this vulnerability to write arbitrary files, potentially leading to code execution.

Mitigation summary

Please visit the Pilz Shop (www.pilz.com/en-INT/eshop) to check for the fixed version

Revision history (2)
  1. Initial publication — 24 November 2022

    Initial revision.

  2. Update A — 5 June 2025

    Fix: quotation mark

Official source: Pilz PSIRT

VDE-2022-003

BECKHOFF: Null Pointer Dereference vulnerability in products with OPC UA technology

Beckhoff — EK9160 (TcOpcUaServer)

Beckhoff PSIRTmiddel

Published

1 March 2022

Last update

5 June 2025

Linked CVEs

Affected sectors

Risk evaluation

By tricking clients of the mentioned products into contacting malicious OPC UA servers and thereby acting as OPC UA clients, a crash of the component can be provoked.

Mitigation summary

Have your applications configured to use other than SecurityMode=None for all OPC UA connections. Avoid that these connect to an unknown OPC UA server with SecurityMode=None. In particular, avoid that your applications connect to servers which they discover via mDNS, a Local Discovery Server (LDS), an untrusted Global Discovery Server (GDS) or even trusted GDS using SecurityMode=none. Especially in the latter case an adversary might be able to apply the 'man in the middle' pattern to attack the connection and inject a bad message which triggers the vulnerability.

Revision history (2)
  1. Initial publication — 1 March 2022

    Initial revision.

  2. Update A — 5 June 2025

    Fix: quotation mark

Official source: Beckhoff PSIRT

VDE-2024-005

TRUMPF: Multiple products contain vulnerable version of 7-zip

TRUMPF — Boost

TRUMPF PSIRThigh

Published

23 January 2024

Last update

5 June 2025

Linked CVEs

Affected sectors

Risk evaluation

Under certain circumstances, opening a specially crafted 7-zip package can exploit an integer underflow vulnerability in 7-zip versions up to and including 22.x This vulnerability allows for a remote code execution, resulting in unauthorized (remote) access to, change of data or disruption of the whole service.

Mitigation summary

Please download the replacement tool. For additional questions please contact your TRUMPF Service with the PR number 501709.

Revision history (2)
  1. Initial publication — 23 January 2024

    Initial revision.

  2. Update A — 5 June 2025

    Fix: quotation mark

Official source: TRUMPF PSIRT

VDE-2025-020

WAGO: Switches affected by year 2k38 problem

WAGO — Industrial Managed Switch

WAGO PSIRTmiddel

Published

2 June 2025

Last update

2 June 2025

Linked CVEs

Affected sectors

Risk evaluation

The Year 2038 Problem affects systems using a 32-bit integer to represent time as the number of seconds since January 1st, 1970. On January 19, 2038, at 03:14:07 UTC, the time value will exceed the maximum for a 32-bit integer, causing an overflow and resetting it to a negative number.

Mitigation summary

Due to the low impact of the vulnerability and the fact that only the logging functionality is affected, there is no fix planned.

Revision history (1)
  1. Initial publication — 2 June 2025

    Initial release.

Official source: WAGO PSIRT