CISA + vendors
ICS Advisories
Advisories specifically aimed at industrial control systems — from CISA ICS-CERT and directly from vendors (including Siemens, ABB, Schneider Electric, WAGO and Phoenix Contact) — including revision history (initial publication, Update A, Update B) and linked CVEs.
499
Found
Advisory data: live connection— last retrieved: 20 November 2026 at 22:50.
Filters
499 advisories found
VDE-2021-016
Weidmueller: Accidentally open network port in u-controls and IoT-Gateways
Risk evaluation
A network port intended only for device-internal usage is accidentally accessible via external network interfaces.
Mitigation summary
Restrict access to the network th device is connected to Do not directly connect the device to the internet
Revision history (2)
Initial publication — 4 May 2021
Initial revision.
Update A — 14 May 2025
Fix: version space, firmware category, added distribution
VDE-2020-041
Weidmueller: u-create studio < 1.20.2 affected by WIBU-SYSTEMS CodeMeter vulnerabilities
Published
12 October 2020
Last update
14 May 2025
Affected sectors
Risk evaluation
WIBU-SYSTEMS report multiple vulnerabilities in their CodeMeter Runtime software. As part of the Weidmüller u-create studio installation the WIBU-SYSTEMS CodeMeter is installed by default. As the u-create studio installation bundle contains vulnerable versions of WIBU-SYSTEMS CodeMeter, the u-create studio is affected by a subset of these vulnerabilities. For details refer to section "Impact".
Mitigation summary
- Use the updated versions of the TRUMPF CAD/CAM products that will be available via your service channel shortly. - Until then, reduce internet usage on workstations with TRUMPF CAD/CAM products to a minimum.
Revision history (2)
Initial publication — 12 October 2020
Initial revision.
Update A — 14 May 2025
Fix: firmware category, reference category, added distribution
VDE-2021-040
Endress+Hauser: Promass 83 with EtherNet/IP affected by a stack-based buffer overflow
Risk evaluation
Promass 83 devices utilizing 499ES EtherNet/IP (ENIP) Stack by Real Time Automation (RTA) are vulnerable to a stack-based buffer overflow. Update A, 2021-10-07: added credits changed title from "ENDRESS+HAUSER: Promass 83 with Ether/IP affected by DoS vulnerability" to "ENDRESS+HAUSER: Promass 83 with EtherNet/IP affected by a stack-based buffer overflow"
Mitigation summary
If an immediate firmware update is not possible, the only way to prevent an attack is to disable communication via EtherNet/IP.
Revision history (3)
Initial publication — 4 October 2021
Initial revision.
Update A — 7 October 2021
Update A
Update B — 14 May 2025
Fix: firmware category, added distribution
VDE-2021-010
Endress+Hauser: products utilizing WPA2 vulnerable to KRACK attacks
Published
18 May 2021
Last update
14 May 2025
Linked CVEs
Affected sectors
Risk evaluation
Endress+Hauser products utilizing WPA2 are vulnerable to KRACK attacks. Proline portfolio is a flow meter with an optional WLAN interface in the display. The flowmeters are only affected if the optional WLAN display is present.
Mitigation summary
If an immediate firmware update is not possible, the WLAN on the unit can also be switched off as a precautionary measure.
Revision history (2)
Initial publication — 15 May 2021
Initial revision.
Update A — 14 May 2025
Fix: version space, added distribution
VDE-2021-031
MB connect line: Apache Guacamole related vulnerabilities in mbCONNECT24
Risk evaluation
Two vulnerabilities in mbCONNECT24 and mymbCONNECT24 can lead to information disclosure and arbitrary code execution. Please consult the CVE entries for details.
Mitigation summary
Update to 3.9R0.5
Revision history (2)
Initial publication — 22 July 2021
Initial revision.
Update A — 14 May 2025
Fix: version space, added distribution
VDE-2021-037
MB connect line: Remote user enumeration in mbCONNECT24/mymbCONNECT24
Risk evaluation
An issue was discovered in the mymbCONNECT24 and mbCONNECT24 software in all versions through V2.9.0.
Mitigation summary
Update mbCONNECT24/mymbCONNECT24 to 2.10.1
Revision history (2)
Initial publication — 27 October 2021
Initial revision.
Update A — 14 May 2025
Fix: firmware category
Risk evaluation
Multiple Vulnerabilities in mbConnect24serv (a software service of mbDIALUP) can lead to arbitrary code execution due to improper privilege management. Update A, 2021-11-24 corrected fixed version in solution from 3.9R0.4 to 3.9R0.5 Update B, 2022-03-28 Updated CVSS score from CVE-2021-33527 from 7.8 to 9.8 due to new information about the vulnerability
Mitigation summary
Update to 3.9R0.5
Revision history (4)
Initial publication — 22 July 2021
Initial revision.
Update A — 24 November 2021
Update A
Update B — 28 March 2022
Update B
Update C — 14 May 2025
Fix: version space, added distribution
VDE-2021-012
MB connect line: multiple products partially affected by DNSpooq
Published
26 April 2021
Last update
14 May 2025
Linked CVEs
Affected sectors
Risk evaluation
Multiple issues have been identified in dnsmasq < 2.83
Mitigation summary
Update to the following versions: | Product | Fixed Version | |--------------------|-------------------| | mbNET/mbNET .rokey | >= 7.0.0 | | mbNET HW1 | >= 5.1.11 |
Revision history (2)
Initial publication — 26 April 2021
Initial revision.
Update A — 14 May 2025
Fix: version space
Risk evaluation
Several Helmholz products are vulnerable to a possible race condition vulnerability in OpenSSH named "regreSSHion".
Mitigation summary
Prevent all access to the sshd daemon listening on port 22.
Revision history (2)
Initial publication — 31 July 2024
initial revision
Update A — 14 May 2025
Fix: version space, added distribution
Risk evaluation
A vulnerability in the Wibu CodeMeter Runtime, which is part of the installation packages of several Festo products, was found. An attacker exploiting the vulnerability in WIBU CodeMeter Runtime in server mode could gain full access to the affected server via network access without any user interaction. This could lead to remote code execution and escalation of privileges giving full admin access on the host system for an already authenticated user (logged in locally to the PC).
Mitigation summary
Update CodeMeter Runtime to version >= 7.60c The latest version of CodeMeter Runtime can be downloaded from WIBU System's web site.
Revision history (3)
Initial publication — 28 November 2023
Initial version
Update A — 5 December 2023
Removed 'MES4 (v3)', 'MES4 (<=v2)' and 'Energy-PC' from affected products as they do not install WIBU CodeMeter Runtime.
Update B — 13 May 2025
Adjusted to VDE template and updated information on fixed version of the Festo Automation Suite. Changed document title from 'Vulnerable Wibu CodeMeter Runtime in Several Festo Products' to 'Festo: Vulnerable WIBU-SYSTEMS CodeMeter Runtime in several products'. Updated legal disclaimer to add references to special provisions.
VDE-2025-024
Wiesemann & Theis: Multiple products from Wiesemann & Theis support deprecated jQuery version
Risk evaluation
Multiple W&T devices are shipped with a jQuery version with a known XSS vulnerability.
Mitigation summary
Access to the WBM should be limited to trustworthy networks or peers.
Revision history (1)
Initial publication — 13 May 2025
Initial revision
VDE-2025-032
Wiesemann & Theis: Multiple W&T Products are vulnerable to cross-site-scripting
Risk evaluation
Multiple W&T Products are prone to an XSS attack. An authenticated remote Attacker can execute arbitrary web scripts or HTML via crafted payloads injected into several input fields of the configuration webpage.
Mitigation summary
Access to the WBM should be limited to trustworthy networks or peers.
Revision history (1)
Initial publication — 6 May 2025
Initial revision
VDE-2025-031
Wiesemann & Theis: Multiple products from Wiesemann & Theis support deprecated TLS protocol versions
Risk evaluation
Com-Server firmware versions prior to 1.60 support the insecure TLS 1.0 and TLS 1.1 protocols, which are susceptible to man-in-the-middle attacks and thereby compromise the confidentiality and integrity of data.
Mitigation summary
Access to the WBM should be limited to trustworthy networks or peers.
Revision history (1)
Initial publication — 28 April 2025
Initial revision
VDE-2020-021
Endress+Hauser: Ecograph T utilizing Webserver firmware version 1.x suffers from improper privilege management
Risk evaluation
The affected device has a web-based user interface with a role-based access system. Users with different roles have different write and read privileges. The access system is based on dynamic "tokens".
Mitigation summary
Customers should configure a perimeter firewall to block traffic from untrusted networks and users to the device. These recommendations will be incorporated into the device documentation (operating instructions). Change default password for operator, service and admin account. Endress+Hauser will not change this behavior. Customers are recommended to take the measures for Temporary Fix / Mitigation as described above.
Revision history (2)
Initial publication — 19 November 2020
Initial revision.
Update A — 11 April 2025
Fix: version range
VDE-2024-064
Beckhoff: Local command injection via TwinCAT Package Manager
Risk evaluation
Beckhoff's TwinCAT 3.1 Build 4026 software is modularized and is installed with different packages depending on user requirements. These packages are selected and installed using either the command line utility tcpkg or the corresponding graphical user interface called TwinCAT Package Manager. Both use the same configuration that specifies where to load packages from. These locations are called feeds, have preconfigured default settings and can be customized by administrative users, for example to add another local mirror of a package server. When using the TwinCAT Package Manager on a PC, a user with administrative access rights can locally set a specially crafted URL for a feed that causes the TwinCAT Package Manager to execute arbitrary operating system commands.
Mitigation summary
Administrative users shall always act thoroughly and inspect the values which they enter.
Revision history (3)
Initial publication — 31 October 2024
initial revision
Update A — 16 January 2025
Fix: list of branches, references
Update B — 11 April 2025
Fix: version range
Published
30 January 2024
Last update
10 April 2025
Linked CVEs
Affected sectors
Risk evaluation
Multiple Pilz products are affected by stored cross-site-scripting (XSS) vulnerabilities. The vulnerabilities may enable an attacker to gain full control over the system. Update: 27.02.2024 Fix typo in advisory title
Mitigation summary
* Only use project files from trustworthy sources. * Protect project files against modification by unauthorized users. * PASvisu Runtime: Limit network access to legitimate connections by using a firewall or similar measures. Use password protection on the online project.
Revision history (4)
Initial publication — 30 January 2024
Initial revision.
Update A — 27 February 2024
Updated Title.
Update B — 6 November 2024
Fix: correct certvde domain, added self-reference
Update C — 10 April 2025
fixed version operators
VDE-2024-040
Multiple TRUMPF products prone to regreSSHion OpenSSH server vulnerabilities
Risk evaluation
TruControl laser control software prior to version 1.60.0 uses an OpenSSH server version affected by CVE-2024-6387. The affected OpenSSH Server version could potentially lead to a remote code execution.
Mitigation summary
Update to first fixed version 1.06.00 or ideally to the newest release 04.04.00
Revision history (4)
Initial publication — 25 June 2024
Initial revision.
Update A — 6 November 2024
Fix: correct certvde domain, added self-reference
Update B — 14 November 2024
removed issuing authority as it is the same as the publisher
Update C — 10 April 2025
Fixed CSAF self-reference URL
VDE-2024-034
Multiple TRUMPF products prone to nftables server vulnerabilities
Risk evaluation
TruControl laser control software from versions 3.50.0 to 4.00.0.B use Linux kernel versions affected by CVE-2024-1086. The affected kernel vulnerability could lead to local privilege escalation.
Mitigation summary
• Update to the new release 4.04.0 of the TruControl software version
Revision history (3)
Initial publication — 25 June 2024
Initial revision.
Update A — 6 November 2024
Fix: correct certvde domain, added self-reference
Update B — 10 April 2025
Fixed CSAF self-reference URL
Risk evaluation
The Fraunhofer Institute discovered a vulnerability in the Profinet IO Coupler 0750-0375 during fuzzing tests. These tests revealed weaknesses in the validation and processing of incoming data packets across various protocols and services.
Mitigation summary
Update to firmware version 02.10.01 (12).
Revision history (1)
Initial publication — 11 March 2025
Initial release.
Risk evaluation
The following tools: * VisiWinNET Smart * VisiWinNET Professional * EASY UI Designer create a directory with insufficient permissions, allowing a low-level user the ability to add and modify certain files that hold SYSTEM privileges, which could lead to privilege escalation.
Mitigation summary
Only use this tool in a protected and controlled environment to minimize network impact and to ensure that the tool is inaccessable from outside. In addition, the use of firewalls is recommended to reduce the attack surface, specially to the internet and the internal business network.
Revision history (3)
Initial publication — 21 August 2024
Initial revision.
Update A — 6 November 2024
Fix: correct certvde domain, added self-reference
Update B — 13 March 2025
Fix: product version
Published
6 March 2025
Last update
6 March 2025
Linked CVEs
Affected sectors
Risk evaluation
Several vulnerabilities in the Endress+Hauser MEAC300-FNADE4 were discovered, that can be accessed via Ethernet.
Mitigation summary
Customers are strongly advised to update to the newest version.
Revision history (1)
Initial publication — 6 March 2025
Initial version
Risk evaluation
Multiple Weidmueller products are affected by an OpenSSL vulnerability. Weidmüller has released new firmwares of the affected products to fix the vulnerability.
Mitigation summary
Update to version V3.6.30
Revision history (2)
Initial publication — 5 March 2025
Initial version
Update A — 5 March 2025
added categories to references
Risk evaluation
Nozomi Networks reported a vulnerability in the pfc firmware sdk-G2 of libwagosnmp. The WAGO pfc-firmware-sdk-G2 is a software development kit designed for WAGO PFC devices which developers to build and customize the firmware.
Mitigation summary
Update to Firmware 04.07.01 (FW29) or Firmware 03.10.11 (FW22 Patch 2). For the latest Custom Firmware, please contact the WAGO support.
Revision history (1)
Initial publication — 5 March 2025
Initial release.
Risk evaluation
Several WAGO Firmwares are vulnerable, due to an incorrect calculation of the buffer size in the CODESYS OPC UA STACK. This can lead to a crash of the runtime of the following firmware versions installed on several devices.
Mitigation summary
The incorrect calculation of the buffer size can be avoided if the maximum supported array length of the OPC UA stack of the CODESYS Control runtime system is limited to a value of 10129639 (Stack.MaxArrayLenth=10129639) or less. This can be achieved by adding the following setting in the runtime configuration under the following path: /etc/codesys3.d/codesyscotrol.cfg
Revision history (1)
Initial publication — 4 February 2025
Initial release.
FSA-202406
Several Codesys Gateway v2 vulnerabilities in Codesys provided by Festo
Published
3 December 2024
Last update
3 December 2024
Linked CVEs
Affected sectors
Risk evaluation
An unauthenticated attacker would be able to send crafted requests to cause the CODESYS Gateway Server V2 to allocate excessive memory or consume all available TCP client connections. Besides, passwords are insufficiently checked during login. All versions of the following CODESYS V2 product prior version V2.3.9.38 are affected: • CODESYS Gateway Server
Mitigation summary
Enable password protection at login in case no password is set at the controller. Please note that the password configuration file is not covered by the default FFT backup and restore mechanism. You must select the related file manually.
Revision history (2)
Initial publication — 3 December 2024
Initial version
Update A — 3 December 2024
One reference has been corrected