CISA + vendors
ICS Advisories
Advisories specifically aimed at industrial control systems — from CISA ICS-CERT and directly from vendors (including Siemens, ABB, Schneider Electric, WAGO and Phoenix Contact) — including revision history (initial publication, Update A, Update B) and linked CVEs.
499
Found
Advisory data: live connection— last retrieved: 20 November 2026 at 20:48.
Filters
499 advisories found
ICSA-26-211-05
Rockwell Automation CompactLogix 5380 ControlLogix 5580 / 1756-EN4TR Communications Module
Risk evaluation
Successful exploitation of this vulnerability could allow an attacker to cause a denial-of-service condition.
Mitigation summary
Rockwell Automation recommend users update to the following versions: ControlLogix 5580: Update to V38.011
Revision history (1)
Initial publication — 30 July 2026
Initial Publication
Risk evaluation
Schneider Electric is aware of a vulnerability in its IGSS Definition module for the IGSS (Interactive Graphical SCADA System) product. The [IGSS](https://igss.schneider-electric.com/) product is a state-of-the-art SCADA system used for monitoring and controlling industrial processes. The IGSS Definition module is a design-time component used by system integrators to create mimic diagrams for plant personnel, enabling them to monitor and control the SCADA system. Failure to apply the remediation provided below may risk loss of data or arbitrary code execution, which could result in the loss of control of the system.
Mitigation summary
Version 18.0.0.26125 of the IGSS Definition module includes a fix for this vulnerability and is available for download through IGSS Master > Update IGSS Software or here: https://igss.schneider-electric.com/igss/igssupdates/v180/IGSSUPDATE.ZIP
Revision history (2)
Initial publication — 14 July 2026
Original Release
Update A — 30 July 2026
Initial CISA Republication of Schneider Electric SEVD-2026-195-01 advisory
Risk evaluation
Successful exploitation of this vulnerability could allow an attacker to gain full system control and misuse it to access or manipulate connected networks and resources.
Mitigation summary
Toptech Systems provides two methods for remediating affected RCU II+ and Multiload II+ units: First, move the device to a closed or segmented network without untrusted access.
Revision history (1)
Initial publication — 30 July 2026
Initial Publication
ICSA-26-211-02
Johnson Controls OpenBlue Employee
Published
30 July 2026
Last update
30 July 2026
Linked CVEs
Affected sectors
Risk evaluation
Successful exploitation of these vulnerabilities could allow an attacker to upload malicious files, execute stored cross-site scripting attacks, or inject arbitrary HTML content.
Mitigation summary
Johnson Controls recommends the following defensive measures to help reduce the risk of exploitation: Apply the latest product update for OpenBlue Employee (FMS Employee). Customers running V2025.3.1 [LV1.1] or earlier should apply the latest available update.
Revision history (1)
Initial publication — 30 July 2026
Initial Republication of Johnson Controls Inc. Security Advisory JCI-PSA-2026-09
9AKK108472A9037
ABB AbilityTM zenon Security Risk Due to End-of-Life MongoDB Component
Published
30 July 2026
Last update
30 July 2026
Linked CVEs
Affected sectors
Risk evaluation
ABB is aware of publicly reported vulnerabilities affecting MongoDB 4.2, which is bundled within the IIoT Services of the affected product versions. MongoDB 4.2 has reached end-of-life and contains multiple known security vulnerabilities. An attacker who successfully exploits these vulnerabilities could potentially access sensitive information, cause denial of service, or disrupt system availability.
Mitigation summary
ABB recommends the following mitigation measures: - Replace bundled MongoDB with a supported version if IIoT services are required: - Where IIoT functionality is required, the bundled MongoDB instance can be replaced with a supported and patched version through manual configuration. - The following zenon online help section explains the process of installing and using your own MongoDB database: zenHelpViewer - Uninstall IIoT Services wherever it’s not required: - If IIoT Services are not required, they can be removed using the Control panel uninstaller. This eliminates the dependency on MongoDB without affecting other zenon components. Refer to section “General security recommendations” for further advise on how to keep your system secure.
Revision history (1)
Initial publication — 30 July 2026
Initial version
Advisory2026-06_VDE-2026-041
CODESYS PROFINET Controller - Out-of-bounds Write
Risk evaluation
CODESYS PROFINET is an add‑on for the CODESYS Development System that provides a fully integrated PROFINET protocol stack along with diagnostic capabilities. When a PROFINET Controller is configured, this vulnerable protocol stack is downloaded to and executed by CODESYS Control runtime systems. The vulnerability in the CODESYS PROFINET Controller is caused by an out‑of‑bounds write during the processing of received invalid PROFINET communication data. Triggering this condition causes the CODESYS Control runtime system to handle the resulting exception and stop the affected PLC application in a controlled manner. Remote code execution is not considered feasible, as the execution flow remains controlled. This issue affects only CODESYS projects that include a PROFINET Controller configuration.
Mitigation summary
Update the following product to version 4.8.0.0. * CODESYS PROFINET To make the fix effective for existing CODESYS projects, you must additionally update the PROFINET Controller in the device tree to the latest version and perform a download of the CODESYS application to the PLC. The CODESYS Development System and the products available as CODESYS add-ons can be downloaded and installed directly with the CODESYS Installer or be downloaded from the CODESYS Store. Alternatively, as well as for all other products, you will find further information on obtaining the software update in the CODESYS Update area https://www.codesys.com/download/.
Revision history (1)
Initial publication — 29 July 2026
Initial revision.
VDE-2026-081
Weidmueller: Security routers IE-SR-4TX and IE-SR-4GT are affected by multiple vulnerabilities
Published
28 July 2026
Last update
28 July 2026
Linked CVEs
Affected sectors
Risk evaluation
Weidmueller security routers IE-SR-4TX and IE-SR-4GT are affected by multiple vulnerabilities (CVE-2026-14167, CVE-2026-14168, CVE-2026-14169, CVE-2026-14171, CVE-2026-2291, CVE-2026-4893, CVE-2026-5172, CVE-2026-40510, CVE-2025-68160, CVE-2025-69418, CVE-2025-69419, CVE-2025-69420, CVE-2025-69421, CVE-2026-22795, CVE-2026-22796) in firmware releases prior to V2.3.0 authorization, robustness and redirect flaws in the proprietary configuration interface and web UI, and multiple vulnerabilities in the bundled third-party components dnsmasq, OpenSC and OpenSSL. All are fixed in firmware V2.3.0.
Mitigation summary
Restrict access to the configuration interface / web UI to trusted administrators and trusted networks, and do not grant the user/permission-management write permission to non-administrator roles.
Revision history (1)
Initial publication — 28 July 2026
Initial version
VDE-2026-085
Weidmueller: SQL Injection Vulnerability in PROCON-WEB SCADA
Risk evaluation
A remote unauthenticated attacker can exploit a SQL injection vulnerability in PROCON-WEB SCADA to execute arbitrary commands.
Mitigation summary
Update PROCON-WEB SCADA to version 6.11.3.
Revision history (1)
Initial publication — 28 July 2026
Initial version
Risk evaluation
ABB has been contacted by a researcher who identified a vulnerability in one of its products. ABB has been contacted by a researcher who identified a vulnerability in one of its products. The vulnerability report has been shared in responsible disclosure. An attacker who successfully exploited this vulnerability could cause the product to become unusable. ABB confirms the vulnerability but at the same time acknowledges that the issue affects exclusively classic KNX devices that are not supporting the latest KNX Secure standard. Due to a lack of security in legacy KNX devices, the issue cannot be resolved via a software change. In order to actively exploit this vulnerability, an attacker requires physical access to the bus, the affected device is connected to. ABB has no plans of corrective measures.
Mitigation summary
Due to the nature of the classic KNX protocol stack and security concept, there are no options to resolve the vulnerability with a software update on a technical level. ABB recommends to follow general security recommendations listed in the security guideline (see References and General security recommendations). In addition, it shall be avoided to control sensitive functionality by legacy KNX devices such as, but not limited to, access control to e.g. hotel rooms or other protected areas. Note: Legacy KNX standards were never designed to meet state of the art security standards like introduced with KNX Data Secure published in 2017.
Revision history (2)
Initial publication — 17 July 2026
Initial version
Update A — 28 July 2026
Initial CISA Republication of ABB PSIRT 9AKK108472A9270 advisory
ICSA-26-209-04
Siemens SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP
Siemens — SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)
Published
14 July 2026
Last update
28 July 2026
Linked CVEs
Affected sectors
Risk evaluation
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1.6 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.
Mitigation summary
Limit access to the interactive shell of the additional GNU/Linux subssytem to trusted personnel only.
Revision history (2)
Initial publication — 14 July 2026
Publication Date
Update A — 28 July 2026
Initial CISA Republication of Siemens ProductCERT SSA-019113 advisory
Risk evaluation
SIMATIC S7-PLCSIM Advanced contains a vulnerability that could allow an attacker to cause a denial of service condition. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.
Mitigation summary
Disable the S7-PLCSIM Virtual Switch binding on the network adapter used by the affected instance. This prevents the adapter from entering an external communication mode and removes the attack vector entirely. (see SIMATIC S7-PLCSIM Advanced Function Manual V8.0, 11/2025 Section 5.3 and Section 6.1.2.3; and SIMATIC S7-PLCSIM Advanced Function Manual API V8.0, 11/2025 Section 7.2)
Revision history (2)
Initial publication — 14 July 2026
Publication Date
Update A — 28 July 2026
Initial CISA Republication of Siemens ProductCERT SSA-828211 advisory
Risk evaluation
OpenSSL has published a stack based buffer overflow vulnerability that allows a remote attacker to cause a denial of service (DoS) or potentially allow for remote code execution. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends countermeasures for products where fixes are not, or not yet available.
Mitigation summary
Currently no fix is available
Revision history (2)
Initial publication — 14 July 2026
Publication Date
Update A — 28 July 2026
Initial CISA Republication of Siemens ProductCERT SSA-734552 advisory
Risk evaluation
The affected products belong to the Controller or Servo Drive product family and contain a vulnerability in a security-critical activation mechanism for service access. The signature verification of a file used for SSH activation can be compromised, which could allow unauthorized access to the device.
Mitigation summary
To resolve this security vulnerability, we recommend installing a firmware update. | Product | Firmware | Fixed Version | | --------------- | -------- | ------------- | | Controller c430 | c4xx | 1.15.2 | | c520 | c5xx | 1.15.2 | | c550 | c5xx | 1.15.2 | | i950 GenA | i950 | 1.15.0 | | i950 GenB | i950 | 2.0.3 |
Revision history (1)
Initial publication — 27 July 2026
Initial release.
Risk evaluation
Successful exploitation of this vulnerability could cause the parsing process to crash, which will cause a denial of service.
Mitigation summary
MZ automation recommends users update to version 2.4.1 or later. Documentation can be found at https://github.com/mz-automation/lib60870/security/advisories/GHSA-f5xp-w6f3-vvrv.
Revision history (1)
Initial publication — 23 July 2026
Initial Publication
Published
23 July 2026
Last update
23 July 2026
Affected sectors
Risk evaluation
Successful exploitation of these vulnerabilities could allow an unauthenticated network-adjacent attacker to crash critical IEC 61850 services or execute arbitrary code, disrupting or compromising protection, visibility, and control functions.
Mitigation summary
MZ Automation recommends updating to the latest build of the libIEC61850 standard. Documentation can be found at https://github.com/mz-automation/libiec61850.
Revision history (1)
Initial publication — 23 July 2026
Initial Publication
Risk evaluation
Successful exploitation of this vulnerability could allow an authenticated attacker to write arbitrary files to restricted system directories outside of the application's intended directory.
Mitigation summary
Users using the affected software, should upgrade to one of the corrected versions as follows:
Revision history (2)
Initial publication — 14 July 2026
Initial Publication by Rockwell Automation
Update A — 23 July 2026
Initial Republication of Rockwell Automation advisory
Published
23 July 2026
Last update
23 July 2026
Affected sectors
Risk evaluation
Successful exploitation of these vulnerabilities could allow an attacker with access to the IT network to manipulate industrial control devices without requiring physical access, specialized insider knowledge, or advanced tooling.
Mitigation summary
Pronetiqs advises users to update to the latest version of the IntraVUE software, version 3.2.1a16 or later.
Revision history (1)
Initial publication — 23 July 2026
Initial Publication
Published
23 July 2026
Last update
23 July 2026
Affected sectors
Risk evaluation
Successful exploitation of these vulnerabilities could allow a non-privileged user to escalate privileges or view the credentials of other users.
Mitigation summary
Weintek recommends users apply the patch package named cmt_typeB_20260316_007.patch, which contains a newer EasyWeb 2.3.17-typeb. This fix will be delivered as a patch-only update; no separate standard firmware release is planned. Users may request the patch directly from Weintek support (https://www.weintek.com/globalw/Support/Knowledge.aspx) or from distributors.
Revision history (1)
Initial publication — 23 July 2026
Initial Publication
Risk evaluation
Successful exploitation of this vulnerability could result in an attacker obtaining confidential information from the device.
Mitigation summary
Johnson Controls recommends users update the XAAP Android application to version 1.53 or later, which contains the fix for this vulnerability.
Revision history (1)
Initial publication — 23 July 2026
Initial Republication of Johnson Controls JCI-PSA-2026-10
ICSA-26-202-10
Rockwell Automation Studio 5000 Logix Designer
Published
21 July 2026
Last update
21 July 2026
Linked CVEs
Affected sectors
Risk evaluation
Successful exploitation of these vulnerabilities could allow for a local attacker to execute arbitrary files, alter configurations, or execute arbitrary code.
Mitigation summary
Rockwell Automation recommends users to upgrade to the following: Studio 5000 Logix Designer: V37.00, 36.01, 35.02, 34.04, 33.04, 32.05 (CVE-2026-9108)
Revision history (1)
Initial publication — 21 July 2026
Initial Republication of Rockwell Automation Security Advisory
Risk evaluation
Successful exploitation of this vulnerability could allow for an attacker to cause a denial-of-service condition on the product.
Mitigation summary
Rockwell Automation recommends users to upgrade to 1718/ 1719 Ex I/O version 3.012 or later.
Revision history (1)
Initial publication — 21 July 2026
Initial Republication of Rockwell Automation Security Advisory
ICSA-26-202-07
Rockwell Automation FactoryTalk Services Platform
Risk evaluation
Successful exploitation of this vulnerability could allow an attacker to impersonate an authorized user on the FTSP server, resulting in unauthorized access to system configurations.
Mitigation summary
Users using FactoryTalk Services Platform v6.60 should apply either the individual patch (RAID 1158263) or the February 2026 Patch Roll-up, or later update.
Revision history (1)
Initial publication — 21 July 2026
Initial Republication of Rockwell Automation SD1786
Published
14 July 2026
Last update
21 July 2026
Linked CVEs
Affected sectors
Risk evaluation
CADRA is affected by multiple zlib and Foxit vulnerabilities. Siemens has released a new version for CADRA and recommends to update to the latest version. Siemens is preparing further fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.
Mitigation summary
Update to V2511 or later version
Revision history (2)
Initial publication — 14 July 2026
Publication Date
Update A — 21 July 2026
Initial CISA Republication of Siemens ProductCERT SSA-470355 advisory
Risk evaluation
Multiple Siemens products are affected by unquoted search path vulnerability in IAM Client. This could allow an authenticated local attacker to perform privilege escalation. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends countermeasures for products where fixes are not, or not yet available.
Mitigation summary
Update to V10.6.1 or later version
Revision history (2)
Initial publication — 14 July 2026
Publication Date
Update A — 21 July 2026
Initial CISA Republication of Siemens ProductCERT SSA-288252 advisory
Published
14 July 2026
Last update
21 July 2026
Linked CVEs
Affected sectors
Risk evaluation
SIDIS Secured SmartPlug before V7.26.0310 is affected by multiple vulnerabilities in the components OpenSSL, OpenSSH, and several other packages as described below. Siemens has released a new version of SIDIS Secured SmartPlug and recommends to update to the latest version.
Mitigation summary
Update to V7.26.0310 or later version
Revision history (2)
Initial publication — 14 July 2026
Publication Date
Update A — 21 July 2026
Initial CISA Republication of Siemens ProductCERT SSA-585531 advisory